EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

PC2B940SEJ3SS General Electric Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB30X46987
$100.47
In Stock
Bake Element
★★★★★
★★★★★
(105)
Part #WB30X46987
The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.
Burner Grate Foot – Part Number: WB02X24790
$17.16
In Stock
Burner Grate Foot
★★★★★
★★★★★
(15)
Part #WB02X24790
This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.
Burner Cap - Black - Medium - 9500 BTU – Part Number: WB29K10023
$39.42
In Stock
Burner Cap - Black - Medium - 9500 BTU
★★★★★
★★★★★
(20)
Part #WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Burner Cap - 15K – Part Number: WB28K10222
$49.60
In Stock
Burner Cap - 15K
★★★★★
★★★★★
(23)
Part #WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
BROIL ELEMENT – Part Number: WB30X46986
$87.78
In Stock
BROIL ELEMENT
★★★★★
★★★★★
(13)
Part #WB30X46986
This broil element is designed for wall ovens and plays a critical role in achieving high-temperature cooking during broil cycles. Positioned at the top of the oven cavity, it delivers intense, direct heat for broiling meats, vegetables, and other dishes. A malfunctioning element may result in the oven failing to reach proper broil temperatures, uneven cooking, or complete loss of broil function. Constructed from heat-resistant materials for durability and performance, this replacement part restores optimal cooking capability. Before installation, always disconnect power to the appliance and verify compatibility with your specific oven model.
Oven Light Housing – Part Number: WB08T10002
$39.95
In Stock
Oven Light Housing
★★★★★
★★★★★
(12)
Part #WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, with an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.
Range Screw – Part Number: WB1K5062
$16.05
On Order
Range Screw
Part #WB1K5062
Range Leg Leveler – Part Number: WB02K10182
$17.28
In Stock
Terminal Block Kit – Part Number: WB17T10011
$64.77
In Stock
Terminal Block Kit
★★★★★
★★★★★
(13)
Part #WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Range Screw – Part Number: WB01T10008
$16.05
In Stock
Range Screw
★★★★★
★★★★★
(2)
Part #WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
CENTRAL GRATE – Part Number: WB31X24737
$103.07
In Stock
Range Surface Burner Head – Part Number: WB16K10079
$201.24
In Stock
Range Surface Burner Head
★★★★★
★★★★★
(16)
Part #WB16K10079
This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.

Common Symptoms of the PC2B940SEJ3SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower bake Element would not heat.
229 of 262 people found this instruction helpful.
  • Ronald from Nassau, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
Was this helpful?
Thank you for voting!
Broken heating element
75 of 93 people found this instruction helpful.
  • Paul from anna, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
Was this helpful?
Thank you for voting!
terminal block melted
56 of 77 people found this instruction helpful.
  • jonathan from willow springs, IL
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U nscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Was this helpful?
Thank you for voting!