P541 Ryobi Chainsaw - Overview

This sprocket is an OEM replacement part for use in chainsaws and pole saws. It is a key component of the chain drive system. The sprocket is a toothed wheel, with a diameter of 1 inch, that is responsible for driving the chain around the bar, allowing it to rotate and cut through materials. It is found at the end of the engine crankshaft...Read more. The sprocket can fail if it is inadequately lubricated, if it impacts a hard object, or if its teeth are worn down. A failed sprocket will cause the chain to move slower, slip, or fail to rotate altogether. You will also notice excessive noise and vibration when using your equipment. Therefore, it is important to replace the sprocket to prevent any additional damage to your equipment. Before you begin, ensure that the chain brake is engaged for your safety. Remove the cover on the chainsaw, and pull out the cutting chain and guide bar. Use a sprocket wrench to remove the old sprocket, position the new sprocket onto the crankshaft and secure it with the retaining nut. Each sold individually.

This is a genuine OEM replacement part, it is sold individually. This is the threaded cap for the 5836201 Oil Tank. It is commonly used with chainsaws, and is compatible with the models listed below. This part prevents oil from spilling out, and is needed to keep the tool running properly. No tools needed for installation, simply thread onto the oil tank.

This retaining ring helps hold a related part in place on compatible chainsaws, pole saws, and trimmers. Replace it if the original ring is lost, bent, or damaged, or if the secured part moves out of position. Remove the battery or disconnect the spark plug wire before repair. Check the exact tool model before ordering.

This is a genuine component which is supplied directly from the original equipment manufacturer for use with Ryobi chainsaws. It is an identical replacement for a missing or a damaged screw that was installed on a new unit. This part is generally utilized to secure the sprocket guard, please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this hardware. This high-quality item is made of durable metal and is sold individually, keep in mind it includes a washer to ensure a tight fit.

This is a genuine item which is supplied by the original equipment manufacturer for use with Homelite and Ryobi chainsaws. It is an identical replacement for a missing or damaged oil tank which was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this ...Read morecomponent. This high-quality item is made of durable plastic material and is sold individually.

This is a genuine Ryobi replacement part that has been sourced from the original manufacturer to be used with chainsaws. The chain tension kit attaches to the body of the saw and is used to mount the bar. The kit includes the screw that adjusts the position of the bar and the tension of the chain. A screwdriver and wrench are needed to install this kit.