This special screw is a genuine Ryobi replacement part, not an aftermarket alternative. It is supplied directly from original equipment manufacturer for use with string trimmers and edgers. This screw is generally used to secure the grass deflector assembly. Please note, this pan head screw is sold individually. You will need a screwdriver to install or remove it.
This is a Genuine OEM replacement part used on some String Trimmers/Edgers. This is a Metal Spring and it is Sold Individually. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced.
This is the plastic slider for your trimmer. It is made of plastic and metal and is white and color. It measures approximately 2 ½ inches long and 1 inch wide. The slide works with the spool and uses centrifugal force to automatically release the cutting line from the spool. The main reason to replace the slider is if it is damaged or mis...Read moresing, or if the cutting line is not being automatically released. This part is sold individually and is an OEM part sourced directly from the manufacturer.
A damaged grass guard may fail to block debris or cut extra trimmer line. First check the guard, line blade, guide wheel, screws, and mounting area. Replace the guard if it is cracked, bent, or missing pieces. Make sure the new guard matches the complete tool model. Turn off the trimmer and remove its battery before starting. The line bla...Read morede is included, but the guide wheel and mounting hardware are not. Install those saved pieces on the new guard, then make sure everything is tight before use.
This part is an OEM from Ryobi. The screw (m4 x 14mm bl) is compatible with a variety of lawn and garden tools. The metal screw is often used to help secure the housing assembly. This item is sold individually, and a hex key is required for the installation. It is encouraged to purchase spares, as they can wear over time and regular use.
This item has been sourced from the original manufacturer to ensure quality. The metal spring is intended to replace the original spring that would have come with the Ryobi trimmer. The spring is used to keep the switch in the correct position and to allow compression when the switch is actuated. This item is sold as an individual replacement part.
Upgrade and enhance the performance of your Ryobi power tools with this reliable motor. Fitted with an AEM system this 18V motor is designed to provide consistent power and efficiency for longer more intensive uses. Whether it?s for a casual DIY project or demanding construction work this durable Ryobi motor guarantees reliable and smooth...Read more operation to get the job done right. Designed with meticulous attention to detail expect it to integrate seamlessly with your tool for optimal operational comfort. Trust in the proven reliability of Ryobi. Make your power tools last longer perform better with this high-quality motor.
This is a genuine OEM sourced part which is specially designed for Ryobi string trimmers and edgers. The plate is utilized to secure the motor It is an identical replacement for a missing or a damaged part that was installed on a new unit. This high-quality motor mounting plate is made of durable plastic and is sold as an individual item....Read more Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, the hardware to secure it is sold separately.
Introducing Ryobi's state-of-the-art Motor Housing Assembly that has been precision engineered for maximum efficiency and durability. This robust assembly is crafted from high-strength ABS material to ensure optimal performance and longevity. The design offers stability and seamless integration in your existing Ryobi equipment, allowing f...Read moreor a smooth operational flow. Whenever you are looking for a reliable, efficient, and durable solution, this Ryobi Motor Housing Assembly is the perfect choice. Use our Ryobi assembly to keep your machine running like new!
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Irene - For model number P2008VNM
May 24, 2024
I need a Grass Deflector and Line Cut-Off Blade with screws for this
String Trimmer Edger. Can you tell me if the parts are available and
the Part No. . Thank you.
Hi Irene,
Thank you for writing in. Our research has found that part number PS16328875 is the Grass Deflector and it comes with the Line Cut Off Blade already attached. We hope this helps.
I need the part that trims the line for Ryobi model P2008vnm.
Hi Jim, thanks for reaching out! The part you need is sold in the Guard Assembly, PartSelect Number PS16328875. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the checkout process online, or by calling our customer service line and ordering with one of our agents. I hope that helps. Good luck with your repair.
Why can't I buy the string cut-off blade as a separate part? I shouldn't have to buy the entire grass deflector for a $2.00 part that has fallen off several times before I lost it.
Hello George, Thank you for the question. We suggest contacting Ryobi as they design the parts and decide what is sold separate. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Judy - For model number P2008VNM
May 28, 2023
While trying to change the edger to a trimmer, the guard assembly snapped off with the screws still in the guard assembly. Does the guard assembly screw into the roller - Part Number 522929001? What are the instructions to repair it?Thank you!
Hi Judy and thank you for contacting us. I am attaching a link to page 2 of your owner's manual with diagrams showing how to install the grass deflector. I hope this helps and good luck with your repair.
https://www.manualslib.com/manual/1403761/Ryobi-P2008.html?page=2#manual
Was this helpful?
Thank you for voting!
D Harnois - For model number P2008VNM
April 26, 2022
If I order the grass deflector will I get the string cutter ?
Hello D, Thank you for your inquiry. We are showing that the metal cutter is included. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
motor burnt out
1 personfound this instruction helpful.
garry from CHESAPEAKE BEACH, MD
Easy
30 - 60 mins
Screw drivers
took apart housing and installed new motor
Was this helpful?
Thank you for voting!
Wore out parts
1 of 3 peoplefound this instruction helpful.
Maire from HARLINGEN, TX
Really Easy
15 - 30 mins
Screw drivers
NOTE: Ryobi parts are interchangeable with other model and part numbers. Item needed was no longer available. But keep looking for something that would work. Found item that look just like what I needed. It worked with no problems or issues. Replaced trimmer spool and grass deflector assembly that was wore out and causing line t
... Read moreo wrap around spool base. Simple change out. Remove 3 Philip screws to remove defector. Hold shaft base with needle nose pliers and turn spool base counterclockwise to remove spool base. Reverse steps to assemble back. Having the right tools helps. Spray screw head with WD-40 let sit a few minutes will help loosen dirty old the screw.
My Orders
