OF45150A Ridgid Compressor - Overview

This drain valve is an OEM part direct from Ridgid and is used on a gas powered compressor. The purpose of the drain valve is to allow moisture to be removed from the tank. Please note each tank has its own drain valve each is sold separately and made of a durable high-quality metal.

This replacement air filter is specially designed to work with Campbell Hausfeld air compressors. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the engine. This is a pleated paper filter in a plastic case. Please note, this filter is sold individually. Replacing this filter is a simple task that should not require any tools.

This is a genuine Ridigid replacement fan kit. It is specially manufactured for their air compressors. It is the main fan that is secured in the shroud of the motor-pump assembly. Please note, this kit includes a plastic fan and the hardware to secure it. You will need a screwdriver set to complete this repair. • Unplug the air compr...Read moreessor • Remove the shroud screws • Remove the shroud itself • Remove the screw that holds the old fan • Secure the new fan using the included hardware • Secure the shroud

This item is available as an individual replacement part. The head gasket fits between the discharge valve gasket and the valve plate. This part may require a screwdriver and a socket set during installation. It is made of a thin metal and will require replacing if it breaks. This is a Ridgid replacement part directly sourced from the manufacturer for use in compressors.

The discharge valve gasket fits between the head and the head gasket. This is a genuine Ridgid replacement part for use in compressors. Keep in mind this part is priced individually. During replacement, it may require a screwdriver and a socket set to help install this part correctly. The gasket is made out of a thin material and will need to be replaced if it breaks.

Original Ridgid Regulator Manifold Assembly used on some Air Compressors. Includes: Manifold Body, 2 Gauges, Regulator, Safety Valve and Quick 2 Coupler Fittings. Manifold Body is not sold separately, however Gauges, Couplers and the Safety Valve are available by themselves. If your Air Compressor is leaking air you may need to Replace the Whole Manifold Assembly.

This safety valve is a genuine replacement part manufactured for use with Ridgid air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. Over time the spring can wear out, and leave the valve open at ...Read morea lower pressure not allowing pressure to build inside the tank. Please note this high-quality brass safety valve is sold individually.

This is an original part from the Ridge Tool Company. The head is constructed of metal, and has been made for use with several compressor machines. This component secures the plates and gaskets onto the piston/cylinder assembly. A screwdriver and a wrench are necessary for making the replacement. This item is sold individually.

This is an Original Manufacturer Approved replacement part used on some Ridgid Air Compressors. This part includes the Piston/Piston Rod, Cylinder and a Screw. The manufacturer does not include the main bearing with these replacement Piston Assemblies. A good quality high speed bearing marked 6203 will work.