NT1MT Ryobi Multi-Tool - Overview

Sleeves, also known as tool holders/adapters, are used to allow you to connect other accessories to a multi-tool, holding and securing them in the process. This sleeve has an approximately 3/4-inch outer diameter and 1/4-inch inner diameter/bore and is compatible with different models of multi-tool. Because this part is a high-use part, i...Read moret is recommended that you order multiple to avoid running out in the future. To avoid having to replace it as often, make sure to clean the sleeve after each use and handle it with care. If you notice high wear on the sleeve or have difficulty keeping attachments connected, it likely needs to be replaced. To replace it, you may need an Allen wrench, screwdriver or other tools.

Genuine OEM replacement part, this item is sold individually. The purpose of the 661379002 Screw is to secure the accessories to the output shaft assembly on the tools shown below. It is a Hex Head Screw The part number 6800201 Hex Wrench can be ordered to remove and install the screw.

Genuine OEM replacement part, this item is sold individually. The purpose of the Blade Adapter allows you to use other manufactures blades. It also stabilizes the blade or keeps the blade in one position, keeping it from moving when the tool is being used.

This is a Genuine OEM replacement part used on Multi-Tool Head. This part is made out of Rubber and is sold individually. The purpose of this O-Ring is to provide an air tight seal between the Sleeve and Adapter Blade.

This is an OEM part sourced directly from the manufacturer. The rubber plug is commonly found in power tools from Ridgid and Ryobi, such as circular saws, jig saws, and grinders. This part is placed between the field and the motor housing to provide support and prevent vibration. You may require a screwdriver or Allen wrench when replacing this item. The rubber plug is provided as an individual replacement part.

This replacement hex key is utilized on Ridgid, Ryobi and Homelite power products. It is a genuine OEM sourced item, it is not an aftermarket imitation. This hex key also known as an allen wrench allows user to tighten and loosen hex socket head screws. This wrench is made from durable metal and it is sold individually.

This is an authentic replacement part manufactured for use with Ryobi multi-tools. The special blade is a cutting attachment used to cut through wood and metals. This blade attachment is sold as an individual replacement part, please see model diagram for associative parts.

A genuine replacement part that is sourced directly from original equipment manufacturer for use with Ryobi multi-tools. The sanding pad is used to secure the sandpaper, for the correct application make sure to check appropriate diagrams of your model. It is made of durable plastic with metal and it is sold individually.

This 120 grit sanding sheet is a genuine OEM sourced item, it is not an aftermarket imitation. It is specially designed for use with Ridgid and Ryobi multi-tools. This is a PSA hook and loop sandpaper. The rough side is called hook and soft side is called loop. The hooks engage into the loop and provide the closure mechanism. Please note, one sheet of sandpaper is included per order.