NT1HD Ryobi Electric Drill - Overview

Genuine Ridgid replacement part, this item is sold individually. 2 of these Brushes are needed for a set. This Brush includes the Brush, Brush Holder, Brush Spring and plug in terminal. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing bru...Read moreshes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is an original replacement part manufactured for use with Ryobi hammer drills and 1/2" drills. The flexible chick key holder secures the chuck key for easy access to the key, and stores the key on the drill. The chuck key hold is available as an individual replacement part.

This is a genuine replacement part that has been OEM sourced to be used with joiners, reciprocating saws, sanders, planers, paint sprayers, screwdrivers, jig saws, drills, routers, circular saws, grinders, and cement saws from Ryobi and Ridgid. The cord clamp is used to secure the power cord where it enters the motor housing assembly. A screwdriver is needed to install this item and it is sold individually.

It is a genuine OEM sourced screw, it is not an aftermarket imitation. This high quality hardware is specially designed for use with Ridgid and Ryobi drills and drivers. It is generally used to secure the drill chuck. Includes (1) torx screw per order.

This genuine OEM sourced replacement ball bearing is a standard item which has multiple uses on a variety of power tools. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out, at this point it should be replaced. This is a sealed metal bearing and it is sold individually.

This is an OEM part sourced directly from the manufacturer. The wire assembly is found in hammer drills and electric screwdrivers from Ridgid and Ryobi. This part is made of metal, with a flexible plastic casing, and it is used to carry electricity in the machine. Please be aware that there are different wires used in the machine. Ref...Read moreer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this part. This item is sold individually.