This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part...Read more. Please be sure to disconnect the power to your refrigerator before starting your repair.
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this part. It is smaller than a standard light bulb, but has a standard size screw-in base. It measures about 3.75 inches in length.
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands. The ...Read morethermistor itself, part WPW10383615, should test at these Ohms depending on temperature. It's recommended to test at room temperature and again in a glass of ice water to make sure it's sensing temperatures properly. So it should read around 3000 - 5000 Ohms at room temperature 7000 - 10000 Ohms at 0°C and 20000 Ohms at -15°C.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Introducing the Whirlpool Refrigerator Leveling Leg. This genuine OEM part supports your refrigerator, ensuring it remains stability and level. The height of the leveling leg can be adjusted to suit your unique refrigerator model, providing you with versatility and customization. This leveling leg is compatible with some models of Whirlpo...Read moreol, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridges. For a smooth installation, we recommend wearing work gloves to protect your hands. Verify your model compatibility before purchase.
The compressor run capacitor helps keep the motor running smoothly in refrigerators. It works with various models and is a genuine replacement part. Always unplug the refrigerator before installing the capacitor, and check the part number for compatibility with your model.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William - For model number MZF34X20DW03
July 5, 2021
Why is this model not freezing?
Hello William, Thank you for the question. We suggest testing the Refrigerator Temperature Sensor, PartSelect Number PS11753994. The temperature sensor senses the temperature inside the appliance and sends information to the electronic control. When testing the resistance of the Thermistor with a multi meter, it should read at around 11,000 ohms at room temperature to be working correctly. Good luck with your repair!
What is the part number of defrost heater assembly, price, availability and delivery time to Yonkers, NY?
Hello Salim, Thank you for your inquiry. Researching the model number that you have provided, we show the compatible defrost heater as part# PS11752658. The stock status and prices for parts are always listed above the Add to Cart button on our site underneath the part information. If you are not sure what a stock status means, you can click on it and a separate window will appear with the explanation for what that status means. In the case of this part, it does show as currently in stock. Our shipping methods are listed on the shipping methods screen after you've added the part to the shopping cart and clicked check out: EconoShip (Usually 3-7 Business Days) ($9.25)
Standard (Usually 2-3 Business Days) ($11.45)
Next Business Day ($32.95) We hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Marcus - For model number MZF34X20DW03
March 16, 2023
Are there any filters to clean or replace on this model freezer?
Hi Marcus, thank you for reaching out. According to our research, there are no filters on your model. We hope this is what you are looking for!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
William - For model number MZF34X20DW03
July 6, 2021
How do i find the "temp sensor". Remember, i am 76, and not done a job like this. Detailed directions would really help this old man.
Hi William,
Thank you for your question. One temperature sensor is located with the evaporator coils behind the freezer wall and the other temperature sensor is along the wall in the refrigerator section. Here is a link to a video from our YouTube Channel that you may reference that may help you, https://www.youtube.com/watch?v=a1Z_oOMFXGk We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Maria - For model number MZF34X20DW03
May 21, 2025
The top of the freezer door has a bend what parts do I need to fix the problem
Hi Maria, thank you for the question. To fix this issue you may need to replace the door assembly, part number PS11725705. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original bracket foot brake screw hole was stripped and foot brake would not extend
16 of 20 peoplefound this instruction helpful.
Daniel from BOCA RATON, FL
A Bit Difficult
30 - 60 mins
Nutdriver, Screw drivers, Socket set
The repair seemed simple, I just needed to remove the old bracket -- 4 screws -- and slip the new one on.
The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes,
... Read moreI needed to shim up the side of the fridge that I was working on.
To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
The freezer wasn't defrosting.
18 of 32 peoplefound this instruction helpful.
Nancy from JAMESTOWN, NY
Very Easy
Less than 15 mins
took the old thermistor out and put the new one in.
My Orders
