MAC2400 Makita Compressor - Overview

This is a manufacturer approved replacement part designed to work with Makita air compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a pressure switch could be leaking air. If it is leaking air the pressure switch should be replaced for a compressor to operate properly and safely.

This is an authentic Makita replacement part that has been OEM sourced to ensure a high level of quality. The regulator is intended to be used with air compressors. This part attaches to the manifold block. The regulator is used to adjust the amount of air pressure inside the tank. This item is sold as an individual replacement part.

The drain cock fits onto the air tank with frame. It is an OEM replacement part for Makita air compressors. This part is available individually and is made of metal. A wrench may be required to replace this part if it becomes broken.

It is an authentic OEM sourced replacement part which is specially designed for use with Makita air compressors. This is an identical replacement for a missing or a faulty oil filter/crankcase breather that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and applica...Read moretion of this item. Keep in mind this high-quality part is made of durable materials and is sold individually.

This replacement pressure gauge is a high quality item designed for Makita air compressors. It is an authentic item that is sourced directly from original equipment manufacturer to provide in-tank pressure readings for the user. Please note one pressure gauge is included per order. When replacing this item you will need a wrench, make sure to unplug the air compressor and bleed out air from the tank.

This is an authentic manufacturer-approved replacement part which is specially designed for use with Makita air compressors. Its purpose is to filter out dust and debris from contaminating the engine, over time it may wear out and get clogged eventually requiring a replacement. This high-quality filter is made of durable pleated paper material and is sold individually.

The inlet valve seat goes between the valve seat to head gasket and the exhaust valve seat gasket. It is available as an individual replacement. This genuine item is supplied by the original equipment manufacturer for use with Makita compressors. An adjustable wrench may be necessary during the installation of this part. It is made of metal and will need to be replaced if it becomes broken.

This is an authentic replacement part sourced directly from the manufacturer. The exhaust valve seat is found in Makita air compressors. This part is made of metal, and is placed in the cylinder head to allow exhaust air to flow out into the discharge tube assembly. You may require a screwdriver or Allen wrench when replacing this part...Read more. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. Be sure to correctly orient the exhaust valve seat, the inlet valve seat, and the gasket between. This item is sold individually.

This is an authentic slight glass which includes the sealing o-ring gasket. It is a high quality item that is sourced directly from original equipment manufacturer for use with Makita air compressors. It allows user to check the oil level of the unit. Please note one durable clear plastic sight gauge is included per order.