LZAS20KA484 ((850000 - 919999)(2010)) Exmark Lawn Tractor Accessories - Overview

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This part is sold individually and is made of plastic and metal. The single pole switch connects to the wiring harness. A set of pliers may be required to replace this part if it becomes broken. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy for use in lawn tractors and riding mowers.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

This authentic manufacturer-sourced component is made for use with snowthrowers. The lock nut is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your specific model for the correct location and application of this part. Note, the lock nut is designed to resist loosening wh...Read moreen it is properly secured. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

This is an authentic Toro replacement part manufactured for use with lawn tractors. The special insulator bushing is used to seal the fitting between the fuel valve and the fuel tank and to prevent damage to either part. This bushing is available as an individual replacement part, please see model diagram for associative parts.

A deck wheel that drags, wobbles, or has a flat spot may no longer protect the turf correctly. The smooth roller touches the ground when the mower deck passes over a raised area, helping prevent the blade from cutting deep patches. Check deck level and tire pressure first because poor adjustment can also cause scalping. Match the replacem...Read moreent using the complete mower model and serial number, and compare the bore, width, bracket spacing, and required hardware. Shut off the engine, remove the key, set the parking brake, and disconnect the spark plug before service. Support the deck securely, tighten the fastener properly, and make sure the wheel turns freely.

This is a genuine Toro replacement part. The clip is commonly found in snowthrowers and lawn tractors. This part is made of metal, and is generally used to secure plate-like components in place. It may be used in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct ...Read morepart. You may require a wrench or screwdriver when replacing this part. This item is sold individually.