LZ23KC526 ((790000 - 849999)(2009)) Exmark Lawn Tractor Accessories - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The lock washer goes next to the flat washer and is made of metal. It is available as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with snowblowers made by Toro and Lawn Boy. A wrench might be helpful during the installation of this part. This item may become broken and will need to be replaced.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This part is sold individually and is made of plastic and metal. The single pole switch connects to the wiring harness. A set of pliers may be required to replace this part if it becomes broken. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy for use in lawn tractors and riding mowers.

This retaining ring is an authentic OEM replacement part for use in various lawn and garden equipment. It is a circular ring designed to secure components in place by fitting into a groove on a shaft. If the ring is damaged or worn down, this can lead to parts coming loose, equipment instability, and increased noise during operation. The ...Read morering may wear down due to exposure to environmental conditions or impact with a hard object. Use a pair of retaining/snap-ring pliers to remove the old ring and install the new one into the designated slot.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

This is an authentic Toro replacement part manufactured for use with lawn tractors. The special insulator bushing is used to seal the fitting between the fuel valve and the fuel tank and to prevent damage to either part. This bushing is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Toro replacement part. The clip is commonly found in snowthrowers and lawn tractors. This part is made of metal, and is generally used to secure plate-like components in place. It may be used in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct ...Read morepart. You may require a wrench or screwdriver when replacing this part. This item is sold individually.