The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
This rotary burner switch is a genuine replacement part designed to control the heat output of a surface burner on a range. When the control knob is turned, the switch regulates the electrical power sent to the burner, allowing for precise adjustment of cooking temperatures. Built for durability, it ensures a reliable connection between t...Read morehe knob and the burner system, even with frequent use. This component is essential for maintaining accurate heat control and consistent cooking performance. Installation typically involves disconnecting power, removing the control panel, and replacing the faulty switch with the new one. Always verify your appliance model before purchasing to ensure compatibility.
This lever supporter, also known as a selector knob support, is an authentic OEM replacement part supplied directly by LG. It is compatible with various models of LG ranges. The knob support is black in color, and it is responsible for keeping the selector knob securely attached to the control panel. It allows you to turn the knob and sel...Read moreect different settings while keeping the knob aligned. If it breaks, the selector knob may fall off or you may be unable to control the various functions of your oven such as temperature and cooking modes. Each lever supporter is sold individually.
A dual radiant heater supplies heat to a cooking area beneath a glass cooktop. Replacement may be needed when one zone does not warm, only the inner or outer section works, or the element has a visible break. Normal radiant burners cycle on and off, so cycling alone does not prove a failure. Check the control switch and connections first,...Read more then match the replacement by full model number, location, size, mounting points, and electrical rating. Disconnect the range at the breaker and confirm the circuit is dead before service. Handle sharp metal edges and the glass top carefully, and return every bracket, shield, and wire to its original position.
This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.
This genuine OEM convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity, ensuring consistent temperatures and uniform cooking and baking. This motor is typically located at the back of your oven, behind a protective panel, where it drives the convection fan. If the motor is broken, you might notice u...Read moreneven cooking or baking, longer cooking times, or a lack of air movement inside your oven. Please keep in mind that this fan motor is sold separately from the fan blade.
This genuine OEM rack is placed inside your oven cavity, serving as a stable surface for your cookware. It measures approximately 25 inches by 17 inches. The wires can warp due to repeated temperature changes over time. Additionally, heavy or unevenly distributed loads can bend the rack structure, and accidental impacts during cleaning ma...Read morey result in broken rack supports, slides, or tubing. When this happens, it must be replaced. It is important to note that this rack is sold individually.
This sheath heater is a genuine OEM heating element designed for select LG oven and range models. Positioned at the top of the oven interior, it provides the heat necessary for broiling and, in some configurations, baking. Engineered to LG’s specifications, this component ensures consistent performance and even heat distribution. It repla...Read moreces older part numbers and is constructed for durability under high-temperature conditions. Common reasons for replacement include uneven cooking, lack of heat during broil cycles, or visible damage to the element. Installation should be performed with the appliance unplugged, and compatibility must be confirmed using the model number, as similar parts may vary in size and shape.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick - For model number LSE5613ST
May 23, 2026
Where dooes part number maz63478602, attach one oven door.
Hi Rick, thank you for your inquiry. Based our research, the part you referring to is the lower door bracket, part number PS11711179. It attaches to the very bottom of the outer door assembly. It mounts horizontally underneath the bottom edge of the outer door frame/glass panel securing it to the rest of the inner door structure. It serves to support and hold the heavy outer glass and metal panel securely in position against the internal frame of the oven door. Glad to be of help!
Hi Kristi,
Thank you for your question. The part number for the 3 middle burner knobs is PS11760694. The part number for the oven knob is PS11760698. The part number for the knobs on each end of the control panel is PS11760695. We hope this helps!
The front burner right is staying always high intensity when ON. I think I need to replace the rotary switch and need the part #. This is the bigger element front right (center part do not control) the outer part seem to work fine
Hello Robert, thank you for contacting us. The right front surface element switch for your model is part number PS17631122. We would recommend replacing it to solve the problem. We hope this helps!
2 of the front burners stay on high heat even when the knobs are on a lower heat setting
Hi George, thank you for contacting us. According to our research, the rotary switches need to be replaced for both burners to fix the issue. The rotary switches for both burners are part number PS17631122. The rotary switches regulate the heat for the burners. When they malfunction, they can send a constant high-heat signal to the element, regardless of the knob's position. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection Fan stopped working, would spin but not continuously on its own
16 of 24 peoplefound this instruction helpful.
Barry from PIERRE, SD
A Bit Difficult
30 - 60 mins
Nutdriver, Screw drivers
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go.
... Read more Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
Was this helpful?
Thank you for voting!
Hammer 1, Glass range top and heating element 0
22 of 52 peoplefound this instruction helpful.
Richard from CHESAPEAKE, VA
Easy
30 - 60 mins
Screw drivers
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a
... Read moresheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Read less
Was this helpful?
Thank you for voting!
the oven knob was not working to select the desire operation
4 of 5 peoplefound this instruction helpful.
Roy from MARBLE FALLS, TX
Really Easy
30 - 60 mins
Screw drivers
Took off the front panel of the range and found the circuit board that operated the Oven knob selections and took it off got the part number and order it. Then just replaced it as the reverse of taking it off . The oven knob work to the desire selections on the range .
My Orders
