The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
This rotary burner switch is a genuine replacement part designed to control the heat output of a surface burner on a range. When the control knob is turned, the switch regulates the electrical power sent to the burner, allowing for precise adjustment of cooking temperatures. Built for durability, it ensures a reliable connection between t...Read morehe knob and the burner system, even with frequent use. This component is essential for maintaining accurate heat control and consistent cooking performance. Installation typically involves disconnecting power, removing the control panel, and replacing the faulty switch with the new one. Always verify your appliance model before purchasing to ensure compatibility.
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
A dual radiant heater supplies heat to a cooking area beneath a glass cooktop. Replacement may be needed when one zone does not warm, only the inner or outer section works, or the element has a visible break. Normal radiant burners cycle on and off, so cycling alone does not prove a failure. Check the control switch and connections first,...Read more then match the replacement by full model number, location, size, mounting points, and electrical rating. Disconnect the range at the breaker and confirm the circuit is dead before service. Handle sharp metal edges and the glass top carefully, and return every bracket, shield, and wire to its original position.
This oven rack is a genuine OEM replacement part for your oven. It provides a stable platform for baking or roasting food, ensuring even heat distribution. It is positioned inside the oven cavity, with slots along the oven walls allowing for height adjustment. It measures 26 inches in height and 11 inches in length. If your oven rack is d...Read moreamaged, you might notice wobbling, uneven cooking, or difficulty sliding it in and out. Please keep in mind that this rack is sold individually, so ensure you get the right quantity for your oven.
This sheath heater is a genuine OEM heating element designed for select LG oven and range models. Positioned at the top of the oven interior, it provides the heat necessary for broiling and, in some configurations, baking. Engineered to LG’s specifications, this component ensures consistent performance and even heat distribution. It repla...Read moreces older part numbers and is constructed for durability under high-temperature conditions. Common reasons for replacement include uneven cooking, lack of heat during broil cycles, or visible damage to the element. Installation should be performed with the appliance unplugged, and compatibility must be confirmed using the model number, as similar parts may vary in size and shape.
This display control board is a high-quality replacement component designed to restore full functionality to your range?s digital interface. It provides clear, accurate readings for temperature, time, and cooking settings, ensuring smooth operation and precise control over your appliance. Built for durability and easy integration, this bo...Read moreard processes user inputs and displays essential information for efficient cooking. If your display is blank, unresponsive, or showing erratic readings, replacing this part is a simple way to bring your range back to peak performance. Installation is straightforward and typically requires only basic tools. There are multiple boards located in these units. Please be sure to diagnose the issue to ensure the correct board is being replaced.
This oven inner door glass panel is designed to replace cracked, broken, or damaged interior door glass and restore proper oven performance and safety. Made from heat-tempered safety glass, the panel helps retain heat inside the oven cavity, supports consistent cooking temperatures, and provides a clear view of food while baking or roasti...Read moreng. Replacing a damaged inner door glass improves energy efficiency and protects users from excessive heat exposure during operation. Installation should be performed only after the oven is completely cool and disconnected from power; the oven door may be heavy, so assistance is recommended, and wearing protective gloves can help prevent injury during handling.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
CLOCK MISSING NUMBERS
11 of 16 peoplefound this instruction helpful.
Brian from WEST PALM BCH, FL
Really Easy
Less than 15 mins
Screw drivers
UN PLUGED UNIT UNSCREWED AOO 15 SCREWS UN PLUGED TOP CERIT BOARD-4 SCREWS 5 SCREWS HOLD BOARD , RE ATACH WIRES ,REATACH TOP BOARD ,PUT BACK SCREWS ON BACKING , RE PLUG IT SHOULD WORK
Was this helpful?
Thank you for voting!
Hammer 1, Glass range top and heating element 0
22 of 52 peoplefound this instruction helpful.
Richard from CHESAPEAKE, VA
Easy
30 - 60 mins
Screw drivers
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a
... Read moresheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Read less
Was this helpful?
Thank you for voting!
Replace Inner Oven glass because it shattered
18 of 41 peoplefound this instruction helpful.
Jeffrey from CERRITOS, CA
Really Easy
30 - 60 mins
Screw drivers
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know
... Read morethe process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.