This refrigerator crisper drawer front is used on the opti-bin crisper drawer and is compatible with your refrigerator. This specific model includes a humidity control and a clear plastic window. This...
The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed...
$31.60
In Stock
Order within the next 37 mins and your part ships today!
This is a lower shelf frame. You may also know it as a refrigerator door cover. This part is the frame only, as the glass is not included. The frame is white and measures about 33 inches wide, and 18 ...
$41.71
In Stock
Order within the next 37 mins and your part ships today!
This tray cover, also known as the front drawer cover, fits on the front of the bottom drawer in your refrigerator. It is made of plastic and is white and clear in color. The cover creates a seal in y...
The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening an...
$13.56
In Stock
Order within the next 37 mins and your part ships today!
This part is sold individually. This part is white plastic on the outside and metal on the interior, with a hole in the middle. The roller assembly is found in your refrigerator. You will find this pa...
$29.58
In Stock
Order within the next 37 mins and your part ships today!
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light co...
$20.97
In Stock
Order within the next 37 mins and your part ships today!
The purpose of the door latch cam is to keep the door latched when you shut it. If your door is not staying shut, you may need to replace the door latch cam. This part is made of white plastic and is ...
Order within the next 37 mins and your part ships today!
Questions And Answers for LFC25760SB
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ellen
February 14, 2020
My refrigerator thermostat will jump up in numbers when i have the door open. Once it gets to 8 it will shut off. If i unplug it and plug it back in it will reset itself and go back to the normal settings. Sometimes it will go weeks without doing this and sometimes it will do it a couple times in one week. I am not sure why it does this. I am going to be putting my home on the market and cannot have it doing this to the next person.
For model number LFC25760SB
Hello Ellen, Thank you for the question. Normally this indicates the PCB Assembly is defective and will need to be replaced. We hope this helps.
How do I reset the ice maker? Has new water control valve & ice maker.
For model number LFC25760SB
Hello Gary, Thank you for the question. On the front cover on the side of the Ice maker, there is a On and Off Switch to reset the Ice maker. We hope this helps!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have cont
... Read moreinuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
Lower shelf frame lifted right off w/o the use of any tools. Removed both drawer cover fronts.The glass shelf which sits on top of frame over time will tend to stick to shelf frame. Running Hot water over glass dissolved stickiness and glass separated easily.Do Not try and pry apart if it seems stuck to shelf frame!. It may crack!. Cleane
... Read mored all parts, and replaced both drawer front covers. Put shelf frame back in on shelf holder. Done. Approx.20 minute repair w/o any problems.