LA0503054 Powermate Compressor - Overview

This is a genuine OEM sourced replacement valve kit designed for use with Powermate equipment. The purpose of the valve plate is to allow air into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and the air is sent into the tank. Over time valves and gaskets will become worn and would need to be replace...Read mored to keep your equipment running well. To complete this repair you would need a wrench set and a screwdriver to take off the housing and the cylinder head. Keep in mind this high-quality valve plate assembly is made of durable metal and is sold as an individual component.

This is an authentic replacement part manufactured for use with Powermate electric air compressors. The head gasket is used to form a seal at the connection between the valve plate and the cylinder head. This head gasket is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied by the original equipment manufacturer for use with Powermate air compressors. This is a high-quality replacement for a missing or damaged gasket which provides an air-tight seal for the cylinder, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality composite material and is sold individually.

This authentic item is supplied directly from the original equipment manufacturer for use with air compressors made by Powermate and Husky. The flywheel attaches to the oil seal and the carrier. When replacing this part a socket set and a wrench set might be required during the installation process. It is made out of metal and will need to be replaced if it breaks. This item is sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Powermate air compressors. It is an identical replacement for a missing or a faulty nut that is specially designed to secure the tube. Please make sure to check the appropriate diagrams of your model for the correct location and applicat...Read moreion of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an original Powermate replacement part. The hubcap is commonly found on air compressors. This part is made of metal, and is used to secure the wheel to the axle. Please note that these hubcaps are not reusable, and you will need to replace them every time you remove the wheel. It may require some extra effort to get the old pa...Read morert off, using pliers or a screwdriver. Once it is removed, the new part can be easily fitted into place. This item is sold individually.

The petcock attaches to the bushing and the o-ring and is made of metal. This part is an OEM from Powermate for use in air compressors. Keep in mind this high-quality part is sold individually. An adjustable wrench might be needed during the installation process. This item may become broken or stripped and will need to be replaced.

This is a genuine manufacturer-sourced part which is designed for Powermate air compressors. It is utilized to regulate the air pressure in the tank. Over time components may wear out and begin to fail eventually requiring replacements. Refer to the owner\\\'s manual and the appropriate diagrams for your model to ensure the proper repair ...Read moreprocedure. Note, this high-quality regulator includes the metal body regulator and the plastic knob. A wrench set will be needed to replace this part.