This range hood slide switch is designed to control key functions such as fan speed or lighting through a smooth, easy-to-use sliding mechanism. Installed behind the control panel, it allows users to adjust ventilation or lighting settings precisely for optimal kitchen comfort and visibility. Built for durability and consistent performanc...Read moree, the switch is engineered to fit securely and operate reliably with regular use. Replacing a worn or malfunctioning slide switch can resolve issues such as unresponsive controls, inconsistent fan speeds, or lighting that will not turn on or off properly, helping restore normal range hood operation and dependable control.
This OEM light bulb is located in your range hood or vent hood unit. It provides light while you cook on the stovetop. You can determine if the bulb is broken by checking if it does not turn on when you flip the switch. The bulb has a power rating of 50 watts and requires a voltage of 120 volts. Signs of a broken bulb include shattered gl...Read moreass or a burned-out filament. If the light bulb is not functioning, it can make it challenging for you to monitor what you are cooking. To remove the old bulb, place your fingers where its silver rim is, and turn it to the left to loosen it from the socket. Gently pull it out of the housing. When installing the replacement bulb, line up the prongs with the receptacle, push it in, and turn it to the right to secure it. Please note that the bulb is sold individually and separately from the socket.
This control slide switch allows users to manually adjust or activate specific appliance functions through a simple sliding motion. It provides reliable mechanical input to the control system and is often replaced when switching becomes inconsistent or unresponsive. Built for durability, it supports smooth operation and accurate control selection.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
one switch went out on the range hood controlling the lights.
3 of 3 peoplefound this instruction helpful.
Jeffrey from MILTON, FL
Very Difficult
More than 2 hours
Screw drivers
The repair did not happen. Parts select sent me the wrong part. They sent a cover plate without any switches. I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
SWITCH CONTROL UNIT HAD BROKEN OFF FROM ONE END OF ITS INTERIOR MOUNTING
2 of 3 peoplefound this instruction helpful.
NICHOLAS & LEIGH from CHARLOTTE, NC
A Bit Difficult
1- 2 hours
Screw drivers
Removed and cleaned to overhead grease trap filters which required a sink full of detergent some wire wool pads and and much elbow grease. This is probably a service task that should be performed at least annually for hoods in frequent use. And be careful not to cut your fingers on some of the sharp interior edges.
With the g
... Read morerease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.
Refitting was the reverse of the above process.
Read less
Was this helpful?
Thank you for voting!
Control panel broken
1 personfound this instruction helpful.
Brian from LEANDER, TX
Very Difficult
More than 2 hours
Amazing. PartSelect shipped me the wrong part and then wouldn't refund shipping cost to return it. They need to change their shipping policy as it now states they refund shipping if they were the cause of the mistake.