KV960 (2008-12) Husqvarna Lawn Tractor Accessories - Overview

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This replacement fuel filter is supplied directly from original equipment manufacturer. It is specially produced for use with Husqvarna chainsaws/power cutters. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is clean. It will over time get clogged and restrict the fuel from getting to the engine. If ...Read morethe engine performs sluggishly or easily chokes out replacing fuel filter may resolve the issue.

This replacement screw is a genuine Husqvarna part, not an aftermarket substitution. It is supplied directly from original equipment manufacturer for use with power cutters. This screw is has multiple applications depending on your tool. Make sure to check appropriate diagram for correct location and use of this hardware. You will need a hex socket head to tighten or loosen the screw. Includes one screw per order.

This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.

This item is a genuine Husqvarna replacement part that has been OEM sourced to ensure quality. The plastic coupler is intended to be used with power cutter saws. The coupler is part of the water supply system that is used when cutting masonry. This item allows a hose to connect to the saw to keep the blade lubricated. The coupler can be purchased as a single item.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. Th...Read moree coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.

This is a genuine Husqvarna replacement part that has been sourced from the original manufacturer to be used with power cutter saws. The metal nipple attaches to the water hose connectors. This item is used to create a water spray that lubricates the saw's blade. The nipple is sold as an individual replacement part, please note two nipples may be needed.

This is a genuine OEM part. The Husqvarna square nut is compatible with many brushcutter devices. The metal nut helps to secure the suspension guide rail, and is sold individually. A wrench is required for the proper repair.

This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately.

This replacement screw is a genuine OEM sourced item designed for use with Husqvarna power cutters. It is a special hardware which has multiple applications, for correct location and use of this item make sure to check appropriate diagrams of your unit. Please note this high quality Torx screw is sold individually.

This is an original replacement part manufactured for Husqvarna power cutter saws. The plastic housing is an elbow for the water hoses. This housing fits on the right side of the blade cover. It has an inlet for the downward hose and an outlet for the hose to the left side nipple. The housing secures the nipple that sprays water on the ri...Read moreght side. The housing is sold individually, please note the nipple, and hoses are available separately.

This is an authentic replacement part sourced directly from the manufacturer. The antivibration element is found in power cutters from Husqvarna. This part is made of metal and high-quality plastic, and is placed in the side of the fuel tank assembly to reduce vibrations from the engine. You may require an Allen wrench or screwdriver w...Read morehen replacing this item. The antivibration element is provided as an individual replacement part.