KUWL304ESS02 KitchenAid Refrigerator - Overview

Diagrams for KUWL304ESS02

See every part. Know exactly what you need.

Diagram

Parts for the KUWL304ESS02

$21.45

SCREW

Part #W11380570

Sold individually. For white and almond models.

$16.07

LEVELER

Part #W11106296

$177.98

MOTOR-EVAP

Part #W10854409

This evaporator fan motor circulates cold air throughout the refrigerator, ensuring consistent cooling and even temperatures. Located in the freezer section, it moves air across the evaporator coils and into the fresh food compartment for optimal performance. A failed motor can cause issues such as uneven cooling, frost buildup, or unusua...Read more

Read less

$17.15

Handle Stud

Part #W11179356

$127.64

Gasket

Part #WPW10624183

This Samsung oven knob is purposefully designed for controlling the heat of surface elements on your range. Remarkably easy to install, it can be removed effortlessly by simply pulling it straight off its post. Ideal for those aiming for a hands-on approach in maintenance, this knob can significantly contribute to cooking precision. A gen...Read more

Read less

$46.34

SCREW

Part #W10859467

$65.73

Refrigerator Power Cord

Part #WPW10204676

$15.00

PLATE

Part #W11263339

$34.74

SWITCH

Part #W10721454

$23.60

Washer

Part #4344760

$17.15

Service Cord Clamp

Part #549193

$63.64

THERMISTOR

Part #W11238391

Questions And Answers for KUWL304ESS02

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Rodney - For model number KUWL304ESS02

October 6, 2025

How do I change the door switch on this beverage cooler. It appears from the diagram that I would remove a total of four screws to remove the bottom front bezel. It also appears there are plates behind the bezel. Just need to know the proper and quickest way to change this. Not sure if this is the cause of random door open alert or not. It seems the most logical and cheapest start to solving the issue. Door closes fine and gaskets are in excellent shape. It may go a few minutes without an alert or a couple of hours. Power was disconnected to reboot the controller for many hours. I appreciate any and all advice. I do commercial kitchen repairs and I'm doing this as a favor for a friend. Rodney

Hello Rodney, thank you for reaching out. Yes, the issue seems to be with the door switch. To install this, you do not need to remove the screws and bezel. Just use a putty knife to depress the tab at the bottom of the switch, and release the old door switch from the frame. Then, disconnect the wires and install the new switch, part number PS10064183. We hope this information is useful!

$34.74

SWITCH

1 person found this instruction helpful.

Was this helpful?