Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUDH03DTBL3

KUDH03DTBL3 KitchenAid Dishwasher - Overview

Get Parts and Repair Help for KUDH03DTBL3

If you know the dishwasher repair part you need, you can browse the list of all parts on the KUDH03DTBL3, or you can search by name or part description. You can also find your part by where it is located on the KUDH03DTBL3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for KUDH03DTBL3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Inlet/Outlet Bezel


Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.




Hose Clamp

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and made of stainless steel. A hose clamp generally attaches hoses and tubes to various equipment This part consists of a band and a screw that tightens along the slots when it is turned. This part works with washers, dishwashers, food waste disposers, and ice makers. This will need to be replaced if you notice leaking coming from the appliance.






Heating Element Nut


Drain Pump

The drain pump ejects the water from the dishwasher.





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bezel fell off - broken tabs

  • Customer: Dian from Thornton, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 48 of 64 people found this instruction helpful
Fiddled around for a few minutes trying to fit the tabs in the holes. Finally figured out it just twisted to put it back on. Very simple but it looked more complicated that it was. read more

Initially the dishwater wasn't cleaning the dishes and heating wasn't there

  • Customer: Aamir from Weston, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
I troubleshoot the heating element (very easy) and replace it then replace the Water intake solenoid. All I have to do is to unscrew the dishwater from counter top, unplug the power cod and water line. Then I took the Whirlpool Quite Partner II out and flip it down and remove water line and then replace the solenoid by removing on nut screw. Very simple fix ... read more

Bezel locks broke and bezels fell off causing serious leakage,

  • Customer: Paul from Lilburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply snapped the replacement parts (4) in place by hand and a quarter turn till they locked. Problem solved - no more leaks. Now if only some one can tell me how to un-warp my Pergo floor! read more