This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model number to see if this filter is right for your fridge. Location for storage of the air filter may vary from model to model, but generally, ...Read moreyou will find a small cover on the back-middle-top of your fridge, which can be popped off to reveal the air filter, which can be easily changed out from there. This part does not come sold with the indicator; it is the filter only. Sold individually.
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne parasites, lead, and pesticides. The filter should be replaced every six months, or when 200 gallons of water have passed through, to ensure...Read more optimum contaminant reduction. The filter is found in the top right corner of your fridge, and replacing it is easy. Simply pop out the old one (keep a bucket underneath to catch any water) and slide in the new one. You will hear a click once it has locked into place. You should run water through the filter for a couple minutes prior to use. This filter measures approximately two inches wide, two inches deep, and 7.5 inches long.
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste. The filter should be replaced every six to nine months, or after 2000 gallons of water have passed through, whichever occurs first.
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This OEM, 120V, 60 HZ water inlet valve is specially designed for refrigerators. It is responsible for regulating the flow of water into the water dispenser and ice maker of the fridge. If your refrigerator is leaking or it is unable to dispense water, the water inlet valve may be damaged or experiencing electrical failure. It will need t...Read moreo be replaced to restore the functionality of the appliance. You can find the valve at the back of the refrigerator where it is connected to the water supply line.
This is a door shelf bin for a variety of refrigerator models. This bin is used to hold and support various food items in your refrigerator door. This shelf measures approximately 12.5 inches wide and 2.5 inches deep and is made of clear plastic. If your current fridge shelf is cracked, broken, or simply not able to adequately support the...Read more items you have placed in it, it will need to be replaced. Replacing this shelf is simple and only requires you to lift out the old one, and push the new one in. This OEM shelf is sold individually, and does not include any other parts or accessories.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
This auger motor is for refrigerators.
Auger motor turns the auger that pushes the ice cubes through the dispenser chute.
Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nadeem - For model number KRFC704FSS00
December 13, 2022
How much refrigerant the compressor needed to be fully functional for the about model. Please reply. Thank you Ben
Hello Nadeem, thank you for reaching out. The refrigerant charge for your model is 4.50 oz. (R-134A). We hope this information helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Christian - For model number KRFC704FSS00
December 6, 2019
I've got an extremely loud noise coming from the back of my fridge compartment. Seems to be in the top 1/3 of the cabinet. I've also noticed some ice build up in the back (bottom) behind the crispers. Vents seem to be clear in the fridge and freezer compartments. Noise has been progressively getting louder over the past few days. Any idea of symptom or parts I should be considering replacing.
Hi Christian, a possible cause is a faulty door seal. The ice could be interfering with the function of the internal parts, inspect the freezer and fridge door seals and see if they need replacement. Thank you for your question and good luck with your repair!
My fridge isn't cooling properly; freezer working great. Any ideas?
Hi Sharon, thank you for getting in touch. If the freezer cools properly but the fridge does not, you may need to check the door gasket, part number PS12070280, as it might be faulty, resulting in warm air entering the fridge section and raising its temperature. Please submit a new question if you have any follow-ups!
hi where can i find the compressor for this model?
Hi Franca, thank you for reaching out. Based on our research, the compatible compressor for your model is part number PS16730812. If you need help placing an order for it, please feel free to give us a call!
Hi Tony,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference for information on how to install an ice maker, https://www.youtube.com/watch?v=_izttWQ9RFg. The refrigerator and ice maker in the video may not be the same as yours, but it will give you a general idea on how to install the part. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice dispenser motor burnt out, water got inside.
86 of 129 peoplefound this instruction helpful.
Blye from Victoria, VA
Really Easy
1- 2 hours
Nutdriver, Screw drivers
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
Read less
Was this helpful?
Thank you for voting!
LED Light stopped working
32 of 42 peoplefound this instruction helpful.
Paul from SUDBURY, MA
A Bit Difficult
30 - 60 mins
Removing the old unit was difficult. The light was clearly designed for installation not for ease of repair. Since I was concerned about marring the surface of the refrigerator I used a paint scraper to get under the lip of the light and another smaller paint scraper to lift the unit away from the body of the refrigerator. It does not
... Read morejust "pop off". I eventually did get it free without any damage to the wall of the refrigerator. The repair was then very easy. There was a connector that was easy to separate allowing for the removal of the old unit without cutting any wires. The new unit had a mating connector, which easily connected to the old connector in the refrigerator. After some pushing I was able to install the new unit into the hole in the refrigerator. It does not exactly "snap in".
Read less
Was this helpful?
Thank you for voting!
lights out in main refrigerator
20 of 21 peoplefound this instruction helpful.
fred from CHESTERFIELD, MO
Very Easy
Less than 15 mins
researched on line and found the wiring was in series and I the suggestion was to replace the first light in the series that was in the freezer. Ordered the replacement light board and took out the existing light and pooped in the new one. Lights now all work! 15 minutes at tops.