My Orders
KN15E1XBW0 KitchenAid Mixer - Overview
Diagrams for KN15E1XBW0
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Dryer Retaining Ring
Part #WP9703438
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substi...Read moretution, but the function is the same. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. Be sure to check drum support roller kit and shaft before ordering parts.
Read less
$26.82
In Stock
Worm Following Gear
Part #W11086780
This gear is used to power your stand mixer. It is attached to the planetary shaft. The gear can become stripped over time or accumulate grease. You may need to replace other mechanical parts at the same time such as the worm gear and pinions. Make sure the mixer is unplugged before beginning this repair. Clear excess grease as you encounter it during this repair.
$63.64
In Stock
Hub Gear
Part #W11192795
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
$28.42
In Stock
Mixer Flat Beater
Part #WPW10672617
This Flat Beater Part Number WPW10672617 is for Stand Mixers. Attaches to the beater shaft and is for normal to heavy mixtures such as cake batters or cookie dough. This has a powder coated finish.
$33.69
In Stock
Wire Whip Mixer
Part #WP9704329
This wire whip is for stand mixers.
Wire whip attaches to the beater shaft and incorporates air into cream, eggs and frostings.
Follow the instructions in the owner's manual for using and installing this part.
$8.55
In Stock
$54.24
In Stock
Mixer Worm Gear
Part #WP9709231
This durable metal worm gear is designed to rotate the planetary assembly in select stand mixers, enabling smooth and consistent operation of attached accessories. As a key internal component, it helps drive the mixing action and ensures reliable performance. If your mixer is unresponsive, making unusual noises, or slipping during use, a ...Read moreworn or damaged gear may be the cause. Replacing this part can restore proper function and extend the life of your appliance.
Read less
$27.36
In Stock
Mixer Thumb Screw
Part #WP9709194
This part is used with the stand mixers attachments, as well as to hold the end cap to the front of the mixer.
$79.64
In Stock
Stand Mixer Speed Control Board and Knob (Black)
Part #WP9706648
This speed control switch assembly is a precision electronic component designed to regulate motor speed in stand mixers. It includes a black control knob and is engineered to deliver consistent performance across various mixing tasks, from gentle stirring to high-speed whipping. By allowing fine-tuned adjustments, it helps prevent overmix...Read moreing and ensures optimal texture and consistency in recipes. This genuine OEM part is compatible with select KitchenAid and Whirlpool stand mixer models and is ideal for replacing a worn or malfunctioning speed control unit. Installation should be performed with the appliance unplugged to ensure safety and proper handling of electrical components.
Read less
$8.55
In Stock
$8.55
In Stock
$75.13
In Stock
Stand Mixer Gear Grease
Part #W11200218
This Stand Mixer Gear Grease lubricates the moving parts of the stand mixer.
Manuals & Care Guides for KN15E1XBW0
Click to downloadCommon Symptoms of the KN15E1XBW0
How this model fails, and the parts that fix it.
Noisy
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic gear housing in stand mixer fractured causing gears to crash
70 of 107 people
found this instruction helpful.
Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plasti
... Read more
c gear housing cover with oreviously purchased die cast replacement part. Assembled main cover.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough
79 of 94 people
found this instruction helpful.
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them
... Read more
, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!