KMG Kawasaki Trimmer - Overview

A cutter reel, also known as a line or trimmer head, is a component that is necessary within the cutting head of a trimmer, since it supplies the trimmer with line/spool. This part is made of plastic and is an OEM part that measures approximately 4.2-inches in diameter and has 2 lanes for spool storage. Since this part is made of plastic,...Read more it can break or crack from a drop impact, or simply over time and exposure to gasoline, oil and heat. If you find that the spool is not coming out properly, or too much spool is being used at once, this part may need replacing. Replacing this part is as simple as opening the trimmer head and accessing where the spool is housed, removing the previous reel, and replacing it with the new one. This part is sold as an individual part without any securing hardware and is compatible with various makes and models of trimmer.

This cutter head assembly, also known as the trimmer head assembly or bump and feed cutting head, is sourced from the original manufacturer, and guaranteed to fit your trimmer. It consists of the cutting head, which is the main body of the assembly that holds the cutting components and connects to the trimmer shaft; the cutter line/cord, ...Read morewhich is a durable nylon string that rotates to cut through materials; a spool, which holds and advances the cutter cord; and a cutting guard, which provides a protective shield or cover that surrounds the cutter cord. The arbor has a diameter of 8mm and left-handed threads with a pitch of 1.25. The head can hold 20 inches of a 0.95-inch diameter cutter line. The cutter head assembly can fail due to mechanical damage to the body, worn-out or tangled strings, or a faulty spool, causing the trimmer to lose its cutting ability. To remove the head assembly, simply twist it off the trimmer shaft. Remove any dirt or debris that may be built up on the shaft and twist the new assembly on the shaft.

This is an authentic replacement part, sourced from the original manufacturer for use with string trimmers. The special cutter sleeve is used to support the spring in the center of the cutting head assembly. This cutter sleeve is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is sourced directly from the original equipment manufacturer for use with Kawasaki string trimmers. This is an identical replacement for a missing or a damaged bolt that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this h...Read moreardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

This brand label measures approximately 7.5-inches in width and 1.3-inches in width and is sold individually. Since this label is sourced directly from the authentic manufacturer, you can easily replace your current label if it is missing or physically damaged, and it will make your equipment look good as new. To replace the label, gently...Read more peel off the old label and use a plastic scraper or fingernail to remove any residue from the previous adhesive. It is highly recommended that you clean the surface of the equipment before applying the new label, so it adheres to the surface as best as possible, free of any dirt and debris. Once the surface is cleaned, you can apply the new label with even pressure.

This is a genuine Kawasaki replacement part for use in trimmers. The cutter case attaches to the cutter bolt. A wrench may be needed during the replacement of this part. It is made out of plastic and will need to be replaced if it breaks. This item is sold individually.

This is a genuine Kawasaki replacement part. The washer is commonly found in string trimmers. This part is made of metal, and is placed to shield the connection between the spring and cutter sleeve within the trimmer head. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of or...Read moredering the correct part. You may require an Allen wrench when replacing this part. This item is sold individually.

It is an authentic OEM part from Kawasaki. The plastic guard is designed to be used with a string trimmer. Its purpose is to protect the user from debris when the trimmer is in use. Please refer to your model's diagram for any associative parts. This part is sold separately.