KIRD801VSS1 KitchenAid Range Hood - Overview
Sections of the KIRD801VSS1
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Fan Switch
PartSelect #: PS11750886
Manufacturer #: WPW10240604
This part activates the fan motor.
$136.03
Special Order
Motor Control
PartSelect #: PS2349083
Manufacturer #: W10235661
This genuine OEM control motor helps operate the downdraft ventilation system by turning the fan on and off as needed. It plays a key role in proper ventilation by supporting smooth fan operation and ...
$155.24
On Order
Questions And Answers for KIRD801VSS1
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
March 3, 2023
I replaced the fuse, it blew again. Stuck in up position. What can I test ?
Thanks
For model number KIRD801VSS1
Hi Bob, thank you for your inquiry. The fuse helps protect the control board by shutting off the downdraft vent motor if there is a power surge. Having too many devices plugged into one electrical outlet, blackout-related electrical overloads, having the wrong lights installed, or using the wrong fuse can be the cause of blowing the fuse again and again. We recommend you switch off the power and then replace the fuse, part number PS11750779. We hope this helps!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
On / Off switch broken
The retractable range ventilator stopped working in the up positiion. Removed grease filter. Removed existing CONTRL-MTR. Disconnected 2 flat control cables and connected them to new CONTRL-MTR and installed the new CONTRL-MTR. Also replaced the push button switch. Replaced grease filter. In testing the unit the ventilater would retra
... Read more
ct but not come back up unless I lifted the top trim piece with the push button switch in it and stuck a tooth pick in the hole to activate the switch. The down rod of the new pushbutton switch was too short. I then noticed the old push button switch had a very thin hard plastic tube extending the down rod. I transfered the tube to the new switch and it worked OK.
Read less
Parts Used:
-
Howard from Bonita, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!