Models
>
KHWS160JBU2
KHWS160JBU2 KitchenAid Miscellaneous - Overview
Sections of the KHWS160JBU2
[Viewing 3 of 3]Manuals & Care Guides for KHWS160JBU2
Click to downloadKeep searches simple, eg. "belt" or "pump".
Thermal Fuse
PartSelect #: PS11740947
Manufacturer #: WP3193190
Replace when you're not getting hot water.
No Longer Available
Screw
PartSelect #: PS880648
Manufacturer #: 489392
This screw is sold individually.
$14.09
In Stock
Screw
PartSelect #: PS11748102
Manufacturer #: WPW10068250
This screw is sold individually.
$6.08
In Stock
Heating Element Kit
PartSelect #: PS354893
Manufacturer #: 4162651
This kit includes the heater, washer and nuts.
No Longer Available
Questions And Answers for KHWS160JBU2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KHWS160JBU2
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No Hot Water
I've replaced several Kitchen-Aid hot water dispensers because of no hot water. This time, I decided I'd dig deeper.
I noticed that the thermal fuse was the first item on the Part-Select list. I assumed it was the most frequently ordered part.
I removed the hot water tank from under the sink. I disassembled the tan ... Read more k and shell. I disassembled the tank and heating elelment. I tested the heating without the thermal fuse. I reassmbled the tank, replaced the thermal fuse, reassembled the tank and shell assemblly. Then I re-installed the entire heating unit back under the sink. Due to leaks, I had to redo the water supply connection. Then it worked fine! Note: I decided to replace the thermostat because the casing had become cracked and brittle. I ordered that seperately.
The exploded diagrams on the Part-Select site were extremely helpful in both diagnosing the problem and making the repair. Thanks for your help.
I noticed that the thermal fuse was the first item on the Part-Select list. I assumed it was the most frequently ordered part.
I removed the hot water tank from under the sink. I disassembled the tan ... Read more k and shell. I disassembled the tank and heating elelment. I tested the heating without the thermal fuse. I reassmbled the tank, replaced the thermal fuse, reassembled the tank and shell assemblly. Then I re-installed the entire heating unit back under the sink. Due to leaks, I had to redo the water supply connection. Then it worked fine! Note: I decided to replace the thermostat because the casing had become cracked and brittle. I ordered that seperately.
The exploded diagrams on the Part-Select site were extremely helpful in both diagnosing the problem and making the repair. Thanks for your help.
Read less
Parts Used:
-
Paul from Woodstock, GA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable), Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No hot water
Unplug unit, turn off water, use 1/4" open end wrench to push down on collet holding in copper tubing - pull out copper tubing (per instructions in units manual), use pliers to squeeze clamp on water deliver plastic tube and remove. Bring unit up on counter, remove three screws holing top on and also remove on/off/temp knob and two screws
... Read more
holding nameplate trim ring on around knob. Locate thermal fuse wire (from thermostat to one leg of the heating element) and remove. Check continuity of both heating element and thermal fuse. No continuity in thermal fuse - replace -. Install new thermal fuse assembly by connection one end to the heating element and other end to thermostat. Re-assemble in reverse order of dissembly.
Read less
Parts Used:
-
John from Aurora, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No instant hot water from unit
Removed unit (disconnected both top water tubes) because unit was behind garbage disposer. Unplugged and Drained water from unit. Then removed thermostat cover and top cover from unit to access the thermal fuse. Removed the thermal fuse by disconnecting the two electrical spade connectors. Replaced thermal fuse, reassembly and reinstalled
... Read more
unit. Problem fixed; unit is again producing instant hot water.
Read less
Parts Used:
-
Jake from Las Vegas, NV
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!