KHT7 Kawasaki - Overview

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.

The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carburetor or to start the engine. If damaged, it will no longer pump fuel. It may also be physically, noticably broken. Replace this part if dam...Read moreaged. Check your make, model and diagrams to ensure you're choosing the right part.

The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it should replaced. Installation is rated as "Easy" and requires Pliers and a Screwdriver. When removing the fuel line to remove the old clamp...Read more, make sure you have a bucket to catch the fuel. Refer to your make, model, and diagram to ensure you're choosing the right part.

The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same time. It is a metal and rubber part, sold individually, rated as "Easy" to install. If damaged, fuel may start leaking from it, and it must be...Read more replaced. The part is attached inside of the fuel cap. Refer to your make, model and diagrams to ensure you're choosing the right part.

This fuel filter helps to ensure the fuel that goes into the engine is free of any contaminants. It is a genuine OEM sourced replacement part that is specially made for Kawasaki lawn and garden equipment. Filters over time may get clogged restricting the fuel flow, if this happens the filter would need to be replaced. This item consists of a metal frame with a felt filter material and it is sold individually.

This replacement spark plug is specially manufactured for use with Kawasaki engines. It is sourced directly from original equipment manufacturer and it is sold individually. Spark plugs are used to deliver the electric current from an ignition system to an internal combustion engine. Over time spark plugs will get dirty or fouled requirin...Read moreg replacement. You should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to replace this spark plug.

It is made of a felt material and is sold individually. The air filter element fits between the cap and the baffle. A screwdriver might be necessary during the installation of this part. This item may become dirty over time and will need to be replaced. This is an OEM from Kawasaki for use in engines, edgers, and trimmers.

This Element Air Filter is used to prevent contaminents from entering the carburetor and engine causing damage. it is an OEM part that is installed inside the air cleaner housing, and is rated "Easy" to install by most customers. Installation will only require a screwdrier. If the filter has become clogged, your engine will have fuel and ...Read moreperformance problems. If this happens, your filter will need to be cleaned or replaced. Refer to your make, model, and diagrams to ensure this is the right filter for you.

This is a genuine OEM supplied replacement part that is designed for use with Kawasaki lawn and garden equipment. It is utilized to keep the fuel in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. One durable plastic fuel cap is included per order.

The bolt attaches to the air filter cap. It is a genuine item that is supplied by the original equipment manufacturer for use with Kawasaki trimmers. This part is made of metal and plastic and is available individually. During replacement, no tools should be required to install this part correctly. It will require replacing if it becomes broken or stripped.

This is an authentic item that is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is one of the special diaphragms that ensure an air-tight seal in the carburetor, please make sure to refer the appropriate diagrams of your model for the correct location and ...Read moreapplication of this hardware. Unfortunately, over time gaskets and diaphragms tend to wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.