Introduce functionality and sleek aesthetics to your kitchen with this Burner Cap by Whirlpool. Cast in a coal matte black, it promises a sophisticated look while ensuring your cooktop operates at its peak. This authentic OEM part is expertly designed to fit specific models of Whirlpool appliances for a smooth replacement. Conveniently po...Read moresitioned, it shields the burner head from food spills while ensuring a consistent spread of flame for even heating. Installation is a breeze, but remember - safety first! Always ensure your cooktop is cool before setting this part. Choose this Whirlpool Burner cap for a kitchen that is functional, safe, and stylish.
Introducing the conversion kit that ensures your appliance runs efficiently. Specially designed by Whirlpool, this Natural Gas to Liquid Propane (LP) Conversion Kit enables you to easily convert your cooktop to use LP gas. It comes complete with the orifices required for an easy and comprehensive switch. However, due to the risk of explos...Read moreion or fire if incorrectly installed, it is recommended that a qualified technician takes care of the installation process. This is a genuine OEM part, tailor-made for compatibility with specific models of cooktops from Whirlpool. Steeped in efficiency and safety, this conversion kit is designed to optimise your cooktop's performance.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Top burners would not light. No "clicking" .
24 of 36 peoplefound this instruction helpful.
Carolyn from Bellingham, MA
Easy
15 - 30 mins
Screw drivers
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
Was this helpful?
Thank you for voting!
gas burners would not automatically light when gas turned on
15 of 20 peoplefound this instruction helpful.
MICHAEL from LONGVIEW, TX
Easy
30 - 60 mins
Screw drivers
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law
... Read more was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!
Read less
Was this helpful?
Thank you for voting!
REPLACING burner head and ignitor
9 of 13 peoplefound this instruction helpful.
Charles from ATLANTA, GA
Very Difficult
1- 2 hours
Pliers, Screw drivers
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
My Orders
