This surface burner knob is used in ranges and ovens. The knob allows you to control and adjust the temperature of the surface burner on your range. Note that this knob accepts a D-shaped shaft. If your knob does not turn properly, gets stuck, or is too loose, changing this part can solve your problem. No tools are needed for this easy re...Read moreplacement. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.
The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approximately 2 inches in diameter. This part is made of black plastic, and is sold individually. Many of our customers have described this repair...Read more as very easy. To complete the repair, simply remove the burner knob and the old knob skirt, replace it with the new knob skirt and re-attach the burner knob. The product contains four locking tabs that should snap into place easily.
This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons to replace the timer knob skirt is if it is cracked or damaged, or if the timer assembly will not advance. This repair is a relatively simple one, but be caref...Read moreul not to snap the plastic clips when you are inserting the new knob skirt into place. This genuine OEM replacement knob skirt is sold individually.
This spark ignition switch and harness assembly is designed to restore reliable ignition performance in select cooktops and ranges. It includes five integrated ignition switches and a connected wire harness, replacing the original unit to resolve issues such as burners failing to ignite, erratic flame behavior, or unresponsive controls. B...Read moreuilt to Whirlpool’s OEM standards, this part ensures proper electrical connections and safe operation. Installation should be performed with the appliance disconnected from power and gas supply.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the knob was melted by a hot pan
21 of 25 peoplefound this instruction helpful.
David from Corinth, TX
Really Easy
Less than 15 mins
popped off the old knobs and put on the new ones in less than a minute
Was this helpful?
Thank you for voting!
I had a faulty wiring on the igniter switches.
12 of 18 peoplefound this instruction helpful.
Raymundo from Cerritos, CA
Really Easy
Less than 15 mins
Pliers, Screw drivers
replaced the set of igniter switches I order from Partselect .com.
Was this helpful?
Thank you for voting!
Stove is over 50 years old, all knobs were broken or worn
12 of 18 peoplefound this instruction helpful.
CAROL from ORANGE, CT
Really Easy
Less than 15 mins
Went to a local appliance parts store and could find only black knobs--there were two kinds--one $3 each, the other $8 each. Both kinds looked AWFUL so I went on line and found partselect.com which had suitable knobs at a very reasonable price, ordered them and they were shipped the next day. Who could ask for anything more? The service
... Read more was terrific.