Models > KFGU706VSS01

KFGU706VSS01 KitchenAid Cooktop - Overview

Sections of the KFGU706VSS01

[Viewing 3 of 3]

Manuals & Care Guides for KFGU706VSS01

Click to download
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: W10491985
Screw
★★★★★
★★★★★
(4)
PartSelect #: PS3651485
Manufacturer #: W10491985
Sold individually.
$8.04
  In Stock
Order within the next 40 mins and your part ships today!
Control Knob – Part Number: WPW10132192
Control Knob
★★★★★
★★★★★
(1)
PartSelect #: PS11748783
Manufacturer #: WPW10132192
Sold individually.
$53.87
  In Stock
Order within the next 40 mins and your part ships today!
HEAD, BURNER (RIGHT REAR, LEFT FRONT) – Part Number: WP8286814
HEAD, BURNER (RIGHT REAR, LEFT FRONT)
★★★★★
★★★★★
(1)
PartSelect #: PS11745753
Manufacturer #: WP8286814
$68.85
  In Stock
Order within the next 40 mins and your part ships today!
HEAD, BURNER (LEFT FRONT & RIGHT FRONT) – Part Number: WP8286815
HEAD, BURNER (LEFT FRONT & RIGHT FRONT)
★★★★★
★★★★★
(1)
PartSelect #: PS11745754
Manufacturer #: WP8286815
$76.91
  In Stock
Order within the next 40 mins and your part ships today!
REGULATOR – Part Number: W11087445
REGULATOR
★★★★★
★★★★★
(1)
PartSelect #: PS12070643
Manufacturer #: W11087445
$188.54
  In Stock
Order within the next 40 mins and your part ships today!
Screw – Part Number: WP3196557
Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.76
  In Stock
Order within the next 40 mins and your part ships today!
HEAD, BURNER (LEFT REAR) – Part Number: WP8286813
HEAD, BURNER (LEFT REAR)
★★★★★
★★★★★
(1)
PartSelect #: PS11745752
Manufacturer #: WP8286813
$75.50
  In Stock
Order within the next 40 mins and your part ships today!
Screw – Part Number: WP3177991
Screw
PartSelect #: PS11740820
Manufacturer #: WP3177991
Sold individually.
$7.76
  In Stock
Order within the next 40 mins and your part ships today!
Surface Burner Head – Part Number: WPW10163407
Surface Burner Head
PartSelect #: PS11749308
Manufacturer #: WPW10163407
Also known as Inner Spreader.
$88.89
  In Stock
Order within the next 40 mins and your part ships today!
Knob, Special Burner (1) – Part Number: W10132191
Knob, Special Burner (1)
★★★★★
★★★★★
(1)
PartSelect #: PS2327490
Manufacturer #: W10132191
$52.43
  In Stock
Order within the next 40 mins and your part ships today!
Cap,Burner(Black) (RF) – Part Number: WP8286818
Cap,Burner(Black) (RF)
PartSelect #: PS11745757
Manufacturer #: WP8286818
$77.65
  Special Order
Cooktop Mounting Bracket & Screw – Part Number: 8186533
Cooktop Mounting Bracket & Screw
PartSelect #: PS1486367
Manufacturer #: 8186533
$52.36
  In Stock
Order within the next 40 mins and your part ships today!

Questions And Answers for KFGU706VSS01

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
center igniter needed replacement
Turn off gas and unplug cooktop. Lift off the 3 grills. Lift off the cast iron and aluminum burner parts. Lift off the five control knobs, noting that the middle knob has a thicker stem.Find star bit that fits the machine screws around each burner. Start removing with the bit in a nut driver. If you have to use a 1/4 inch socket for some, try not to break or strip the screws or the bit. Apply heat with a propane torch if stuck hard. After that, lift stainless tray off. Lift out foil pad. Mine was the center burner igniter. Using two wrenches each side, disconnect gas lines from each side. Phillips head to disconnect plate from burner. The igniter is held in place with spring and clip. Unplug igniter wire from electronic box. I used a hemostat so as not to lose the spring clip .Spring can be removed at the plug end of the wire. A big allen key fits the one inch wide middle burner part - remove it. Now pull the old igniter out through the top of the burner. Use a small round file to make the igniter hole smoother and maybe slightly larger. Thread new igniter through hole, plug end first. Spring and clip on bottom are hard to get. Try not to lose the clip- It can spring off into space.Plug igniter wire into electronic box. I used an anti-seize compound on all threaded parts. Go carefully in reverse order . Plug in cooktop and turn on gas. test new igniter. Good luck
Parts Used:
Igniter-SURF
  • FRANCIS X from LAKE ELSINORE, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Parts Used:
REGULATOR
  • Charles from Buena Park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench (Adjustable)
0 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Instructions were the pits, very poor
replaced the spuds and reset the ventures for LP. Most time was trying to decipher the instructions.
Parts Used:
SPUD-ORFCE
  • Jimmie from Cumberland, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!