KFEG504KPS3 KitchenAid Range - Overview

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

This dual surface element control switch is a genuine OEM replacement part designed to fit select models of stoves, ovens, and ranges. The control switch is an essential component that allows you to turn the surface element on and off, as well as regulate the amount of heat the element produces. If your stove’s surface element isn’t heati...Read moreng properly, fluctuates in temperature, or won’t turn off, replacing the control switch can restore full functionality. Before installation, ensure the range is unplugged, or disconnect the power at the house circuit breaker to avoid electrical hazards. The surface element control switch is usually located behind the stove’s front control panel. To install, remove the panel and disconnect the old switch from the wiring harness. Install the new switch by securing it in place and reconnecting the wiring to match the original configuration. After installation, turn the power back on and test the surface element to verify it operates correctly.

Sold individually.

This surface element switch controls how much heat an electric burner makes. It turns power on and off in cycles as the knob moves from low to high. A burner that stays on high, will not heat, or heats at the wrong level may have a bad switch. Before replacing it, inspect the burner, wire ends, control knob, and nearby parts. Confirm fit ...Read morewith the full appliance model, terminal layout, and 15-amp, 240-volt rating. Turn off the breaker and verify that power is off. Move each wire one at a time before testing.

This range electronic control board manages essential oven functions such as heating, temperature regulation, timing, and display operation to ensure reliable cooking performance. It acts as the main control center of the oven, interpreting user input and regulating the heating elements accordingly. This part is commonly replaced when an ...Read moreoven will not start, does not heat properly, or has a blank or malfunctioning display. Installation involves disconnecting power, accessing the control panel, and replacing the existing board; due to the presence of high-voltage components.