KEYE677BWH2 KitchenAid Dryer Parts & Repair Help | PartSelect
Models > KEYE677BWH2

Sections of the KEYE677BWH2

[Viewing 3 of 3]

Manuals & Care Guides for KEYE677BWH2

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(248)
PartSelect #:PS11741460
Manufacturer #:WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 in...
$10.27
In Stock
(228)
PartSelect #:PS346995
Manufacturer #:341241
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the moto...
$16.54
In Stock
(64)
PartSelect #:PS11741405
Manufacturer #:WP3387134
A cycling thermostat is in tune with the temperature of your dryer and regulates it in order to maintain a certain temperature. This thermostat reaches a temperature of 155 degrees...
$15.04
In Stock
(56)
PartSelect #:PS334299
Manufacturer #:279816
The thermal cut-off turns off the heating component when the dryer overheats, ensuring there is a consistent level of heat at all times. This dryer thermal cut-off kit includes one...
$30.83
In Stock
(68)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$5.04
In Stock
(13)
PartSelect #:PS11743765
Manufacturer #:WP691366
This part provides the tension required for a multi-ribbed belt. It also helps the belt rotate the drum and attaches to the idler pulley wheel. If your dryer will not start or tumb...
$15.48
In Stock
(31)
PartSelect #:PS11752609
Manufacturer #:WPW10314173
This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and does not include the tri-rings. This part is sold separately...
$12.97
In Stock
(37)
PartSelect #:PS11741777
Manufacturer #:WP349639
This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.
$35.56
In Stock
(4)
PartSelect #:PS11755850
Manufacturer #:WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found b...
$6.87
In Stock
(7)
PartSelect #:PS1609293
Manufacturer #:49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs...
$4.97
In Stock
Questions and Answers for KEYE677BWH2
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dryer was working, but no heat.

Dryer Thermal Fuse – Part Number: WP3392519
  • Customer: ANTHONY from CHESHIRE, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 2461 of 2757 people found this instruction helpful
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, ... read more

Dryer tub belt broke

  • Customer: Ray from Denton, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 1010 of 1074 people found this instruction helpful
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of the dryer top with a small flat head screw driver. The top of the dryer will fold back out of the way. At this point I removed the two 1/4 inch screws that are ... read more

No Heat

Thermal Cut-Off Kit – Part Number: 279816
  • Customer: Vernon from Niceville, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 848 of 899 people found this instruction helpful
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off. read more