Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KET700

KET700 Amana Cooktop - Overview

Get Parts and Repair Help for KET700

If you know the cooktop repair part you need, you can browse the list of all parts on the KET700, or you can search by name or part description. You can also find your part by where it is located on the KET700 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KET700

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Burner Control Switch Kit - 8"

This switch controls the stove top surface burner.

Order within the next 1 hr and 40 mins and your part ships today!

Fan Switch Knob

This knob allows you to control the function of the fan switch and takes a D-shaped shaft.

Filter Assembly

This filter assembly is just under eleven inches long and is not quite six inches wide. It is a metallic filter and it is used with some downdraft ranges.








Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken prong that knob fit onto

  • Customer: Lisa from Oklahoma City, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 5 of 11 people found this instruction helpful
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago. read more

The Stem On The Burner Control Sw Broke Off

  • Customer: charles from franklin, LA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I used a phillips screwdriver to remove the control switch. I drew a diagram on a piece paper where the wire contacts connected I wrote the different # and wire colors down . I compared the 2 switches they were the same. So I connected the wires . I put the 2 screws on. The stem was higher than the other switchers. So I had to cut the stem shorter. ... read more