EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KESH307GBL0 KitchenAid Range - Overview

Diagrams for KESH307GBL0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$19.54
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(78)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Range Inner Door Glass – Part Number: WP9781593
$79.82
In Stock
Range Inner Door Glass
★★★★★
★★★★★
(30)
Part #WP9781593
This inner door glass is used in ranges. It creates a transparent heat barrier inside your oven door. For this installment, the only tool needed is a #2 Phillips screwdriver. To repair, first remove the oven door from the range by lifting and pulling from the bottom of the hinges. To dissemble the door, you will need to remove the screws on the outer edge and remove the side pieces. There are also screws towards the middle that need to be removed to pull out the bottom trim. Next, lay the door on its back and slide outer door glass off and remove top trim. For the rest of the installation instructions refer to the manual provided by the manufacturer. Pro tip: remember to wait until the surface is cool before starting this repair project.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Range Surface Burner Knob – Part Number: WP9750372FF
$24.67
In Stock
Range Surface Burner Knob
★★★★★
★★★★★
(5)
Part #WP9750372FF
This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with the hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.
2 Piece Broiler Pan – Part Number: 4396923
$49.50
In Stock
2 Piece Broiler Pan
★★★★★
★★★★★
(6)
Part #4396923
This broiler pan and roasting rack set is designed to help reduce mess while cooking by allowing grease to drain away from food. Its durable porcelain-coated construction stands up to high temperatures and makes cleanup simple. With approximate dimensions of 16 3/4 inches long, 12 3/4 inches wide, and 1 3/4 inches high, it offers a convenient size for everyday broiling and roasting.
Cooktop Cleaner – Part Number: W10355051
No Longer Available
Cooktop Cleaner
★★★★★
★★★★★
(7)
Part #W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
SOCKT-LITE – Part Number: W11594027
$66.77
In Stock
SOCKT-LITE
★★★★★
★★★★★
(15)
Part #W11594027
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the back of your range, so in order to access it you will need to remove the back panel. Many of our customers have rated this repair as easy, and it should take less than 15 minutes. Before you begin this repair, make sure to disconnect the power source from your range. This is an OEM part sourced directly from the manufacturer.
Range Light Gasket – Part Number: WP3184533
$9.62
In Stock
Range Light Gasket
★★★★★
★★★★★
(5)
Part #WP3184533
This part creates a seal around the light lens and bulb.
Oven Bake Element – Part Number: WP9750213
No Longer Available
Oven Bake Element
★★★★★
★★★★★
(5)
Part #WP9750213
This bake element has push-on wire terminals and is found at the bottom of your oven cavity.
Range Rear Leveling Leg – Part Number: WPW10058460
$9.62
In Stock
Range Rear Leveling Leg
Part #WPW10058460
Sold individually.
Range Light Cover Lens – Part Number: WP9781049
$57.38
In Stock
Range Light Cover Lens
★★★★★
★★★★★
(10)
Part #WP9781049
The light cover lens in your oven is designed to protect the light bulb. If your light cover lens is damaged, you will need to replace it. This part is made of clear glass and is roughly 3 inches in diameter. Many of our customers have rated this repair as easy, and it should take less than 10 minutes to complete. In order to do this repair, simply unscrew the old light cover lens, and replace it with the new one. If your old light cover lens is damaged, be careful of any broken glass when completing this repair.
Spray Paint - 12 oz. - White – Part Number: 350930
$36.85
In Stock
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Manuals & Care Guides for KESH307GBL0

Click to download

Common Symptoms of the KESH307GBL0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Inside door glass broke
133 of 151 people found this instruction helpful.
  • MANNY from LIVERMORE, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installing the parts together. Relatively easy process as long as you remember where the parts go. When in doubt, I had to refer to the pictorial of the disassembled door shown on your website.
Was this helpful?
Thank you for voting!
Inner Oven Door Shattered during cooking.
47 of 51 people found this instruction helpful.
  • Gloria from Melbourne, FL
  • A Bit Difficult
  • 15 - 30 mins
  • Wrench set
First, layed tape across all broken glass to keep glass from shattering more and releasing more bits of glass. Pull up and out the oven door. Had table set aside covered with an old sheet to lay door on, After laying door on table, Removed outer screws. Needed phillips #2 & #3 tip widths and electric screwdriver, for inner screws that whe re difficult to remove. Making notes of what came off first! ( (rt & left, bottom,/top) when removing metal frame braces, and in what order they go in when reassembled . Did the same with screws & set them aside in groups. Then marked the groups of screws. Removed the metal door panel. Carefully removed the in between panel of glass. Set Outer glass aside along with metal "door"and inner door glass,and proped them up in a safe place. Carefully removed the broken & shattered inside glass wearing rubber gloves. Had a garbage can next to the table to with news paper to wrap glass. Cleaned area. Replaced glass taking care not to tighted screws so much as to break the glass. Put added insulation.(Whcih was not the same as in diagram), around the edge. put back the inner glass panel, care not to leave prints, tighten screw ( care not to break glass) Cleaned the door sides and bottom, all had alot of grease buildup.
Put back the metal door portion. Cleaned the outer glass door front and back. Being careful not to break it (or leave prints inside). Replaced the side and bottom metal frames. Wiped it down and put door back on stove.
Was this helpful?
Thank you for voting!
Socket Light had a bad thread
44 of 65 people found this instruction helpful.
  • Edmund from Emporium, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Socket Lite come with clips attached to the outside
of the housing. After you unhook the 3 lead wires
that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you
snap in the new unit. Attach the 3 wire leads, put a
oven bulb in the socket end, and the install the light cove r
Was this helpful?
Thank you for voting!