My Orders
KECS16 KitchenAid Cooktop - Overview
Models starting with KECS16
Click on the best match to narrow your results.
- KECS160SWH0 KitchenAid Cooktop
- KECS161GAL0 KitchenAid Cooktop
- KECS161GAL1 KitchenAid Cooktop (ELECTRIC COUNTER UNIT)
- KECS161GBL0 KitchenAid Cooktop
- KECS161GBL02 KitchenAid Cooktop
- KECS161GBL1 KitchenAid Cooktop
- KECS161GBT0 KitchenAid Cooktop
- KECS161GBT02 KitchenAid Cooktop
- KECS161GBT1 KitchenAid Cooktop
- KECS161GSS0 KitchenAid Cooktop
- KECS161GSS02 KitchenAid Cooktop
- KECS161GSS1 KitchenAid Cooktop
- KECS161GWH0 KitchenAid Cooktop
- KECS161GWH02 KitchenAid Cooktop
- KECS161GWH1 KitchenAid Cooktop
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$15.00
In Stock
Drip Bowl - 6 Inch
Part #W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the...Read more element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it now has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Read less
$16.07
In Stock
Drip Bowl - 8 Inch
Part #W10196405RW
This part is located beneath the element and catches any spills.
$16.07
In Stock
Range Surface Burner Plug-In Block Kit
Part #330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. W...Read morehen your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Read less
$33.69
In Stock
Surface Burner - 8 Inch - 2600W
Part #WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replac...Read moree the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Read less
$52.67
On Order
Delta Frame Surface Unit - 6 Inch
Part #WPY04100165
This is a delta frame surface unit, also known as coil element, for a stove, range, or oven. It is a 6-inch surface burner with a reinforced delta frame that carries 1250 watts and 240 volts. The burner has four turns and is compatible with many electric ranges. The center medallion is black in color. The burner provides heat to your cook...Read moreing area to cook your food items. If your burner is not heating properly, you may need to replace it. Be sure to disconnect power to the appliance before completing this repair.
Read less
$24.67
In Stock
Range Surface Burner Knob
Part #WP9750372FF
This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with ...Read morethe hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.
Read less
$7.47
In Stock
$95.15
In Stock
Surface Burner Element - 8 Inch
Part #WP3191454
This surface burner element is a genuine OEM replacement part for your kitchen appliances. It measures 8inches in diameter with a wattage of 2100W. You will need to replace the element if you notice that it is discolored, making popping or crackling noises, no longer level, or no longer heating up. To replace the faulty burner element, ge...Read morently lift and pull it off the appliance. Next, plug the new element terminals into the socket. Remember to first turn off your appliance or turn off the circuit breaker before you begin any repairs.
Read less
$9.62
In Stock
$75.37
Special Order
$97.00
In Stock
Burner Surface Element - 8 Inch
Part #WP3177565
This is a burner surface element and is 8 inches in diameter and 2600 watts. The burner surface element functions as a cooking area on the cooktop of the range. The purpose of this part is to supply heat to the cooking area. This is a 5 turn coiled surafce element that features looped terminal ends. The element is sold individually. Befor...Read moree installing, make sure to unplug the cooktop and to allow enough time for your current element to cool down. The most common reason for needing a new element is if your current one will not heat.
Read less
$22.52
Special Order
Common Symptoms of models starting with KECS16
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowls were rusty and rotting through
491 of 504 people
found this instruction helpful.
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!
Other Parts Used:
Was this helpful?
Thank you for voting!
Just Replaced Ole Drip Bowls.
379 of 395 people
found this instruction helpful.
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique compan
... Read more
y!!!!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
8 inch burner wouldn't come on. Wires shorted out
61 of 72 people
found this instruction helpful.
One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap
... Read more
. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!