KECO KitchenAid - Overview

Models starting with KECO

Click on the best match to narrow your results.

Parts for models starting with KECO

$21.45

Range Surface Burner Knob

★★★★★

(12)

Part #WP307458

This knob is sold individually.

$18.22

Heat Resistant Adhesive

★★★★★

(1)

Part #W10841140

This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.

$53.20

Thermal Fuse

★★★★★

(1)

Part #WP307473

This thermal fuse is mounted on either the heating element or burner tube housing.

$52.67

Knob Bezel

Part #W11194997

$202.03

Dryer Timer

★★★★★

(1)

Part #WP305448

This dryer timer controls how long each drying cycle runs and helps manage the heater and motor so clothes dry evenly and reliably. It is commonly replaced when a dryer won’t start, won’t advance through cycles, or leaves clothes damp due to incorrect timing. Installing the new timer is straightforward—unplug the dryer, remove the control...Read more

Read less

Indicator Light Kit

Part #8316805

Complete Heater Assembly

★★★★★

(1)

Part #WPY303778

TIMER

Part #305447

THERMISTOR

Part #4164508

Timer

Part #305449

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

Connector, Triac

Part #305453

High Voltage Transformer, 120 V Input, H6T-3825

Part #305456

Common Symptoms of models starting with KECO

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Videos related to the KECO

Watch our pros, then fix it yourself.

Replacing the Thermal Fuse

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Dryer stopped working

27 of 33 people found this instruction helpful.

Mary Ann from East China Township, MI
Easy
15 - 30 mins
Nutdriver, Screw drivers

From previous experience I suspected the thermal fuse. Turned off the power and removed the front of the dryer by removing the two philips head screws in the door hinge and the two screws on the opposite side of the opening. The front came off easily since all that holds it in place besides the 4 screws are two spring clips. The ther ... Read more

Read less

Was this helpful?

Dryer Timer Failed

18 of 21 people found this instruction helpful.

STANLEY from POWAY, CA
Easy
15 - 30 mins
Nutdriver, Screw drivers, Socket set, Wrench set

Repair was simple after I found out how to get access (via 4 screws on the top edge). The plastic plug at the dial center was pried out & screws securing timer dial removed. The screws securing the timer were behind the dial plate. With the old timer out the wires were carefully swapped and the system reassembled.

Was this helpful?

Dryer would not turn start

10 of 13 people found this instruction helpful.

John from Midway, GA
Easy
15 - 30 mins
Nutdriver, Screw drivers

I troubleshot the repair using the repair help section from Parts Select. It made finding the problem a snap. I then removed the four wires and two screws that held the heating element in place. Removed two screws that held thermal fuse in place and replaced. By accomplishing the repair myself I saved well over a hundred dollars.

Was this helpful?