My Orders
KDTM604KBS0 Whirlpool Dishwasher - Overview
Diagrams for KDTM604KBS0
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$15.00
In Stock
Dishwasher Mounting Bracket
Part #WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Read less
$48.45
In Stock
Tine Row
Part #W10728160
The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row con...Read moretains 11 straight tines and 1 curved tine. This product is sold individually. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old tine row and replace it with the new one.
Read less
$7.47
In Stock
Washer Hose Clamp
Part #WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Read less
$7.47
In Stock
$9.62
In Stock
Hose Clamp
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Read less
$7.47
In Stock
$19.30
In Stock
Elbow Hose Fitting
Part #W10685193
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
$55.29
In Stock
Water Inlet Valve
Part #W11434044
The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.
Read less
$65.73
In Stock
HEATER
Part #W11537778
This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read moreneath the lower rack. The heating element includes a bushing, which is a protective covering that prevents water from coming into contact with the electric terminals, and two plastic nuts.
Read less
$22.52
On Order
STOP
Part #W11545307
Enhance the operational efficiency of your dishwasher with this genuine OEM Stop Front Dishrack Stop Clip from Whirlpool. This product is designed to prevent the dishrack in your dishwasher from sliding completely off the slide rail. Accurately calibrated to interface seamlessly with numerous models of Whirlpool dishwashers, this Stop Cli...Read morep is a testament to Whirlpool's enduring commitment to quality and innovation. Discover the exceptional compatibility, as it also works smoothly with selected models of KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Installing this part is easy and safe; however, remember to wear gloves to protect your hands during the process. Remember, to ensure optimal performance, verify that this part is suitable for your model before ordering.
Read less
$17.15
In Stock
MANIFOLD
Part #W11573754
This dishwasher manifold, also known as the top dishrack tube hanger, is a genuine OEM replacement part designed to direct water to the spray arms and support smooth upper rack movement. It attaches to the bottom of the upper dishrack, allowing water to flow from the pump for thorough cleaning. Made from durable plastic, this component of...Read moreten requires replacement when cracks or mineral buildup occur, leading to poor washing performance or a jammed rack. Installation is simple and helps restore even water distribution and proper rack function, ensuring your dishwasher operates efficiently.
Read less
$19.30
In Stock
MANIFOLD
Part #W11568642
Embrace the quality and reliability of this genuine Whirlpool MANIFOLD. Exclusively designed for certain models of Whirlpool, it provides a robust connection as a third-level spray tube bracket in dishwashers, ensuring thorough cleaning and optimal performance. The bracket serves an important function by securely attaching the spray tube ...Read moreto the dishrack at the third level. For installation, remember to wear work gloves to protect your hands. Please verify that this part suits your model before purchase, as similar parts may differ subtly in size and shape. Enjoy a well-run dishwasher and sparkling dishes with this Whirlpool OEM part.
Read less
Common Symptoms of the KDTM604KBS0
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More