Models
>
KDTE104KPS0
KDTE104KPS0 Whirlpool Dishwasher - Overview
Sections of the KDTE104KPS0
[Viewing 8 of 8]Keep searches simple, eg. "belt" or "pump".
Mounting Bracket
PartSelect #: PS11745496
Manufacturer #: WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
$10.04
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Screw - 8-18 x 5/8
PartSelect #: PS11747050
Manufacturer #: WP9741232
Sold individually.
$7.95
In Stock
Elbow Hose Fitting
PartSelect #: PS9493732
Manufacturer #: W10685193
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
$23.44
In Stock
Dishrack
PartSelect #: PS16543613
Manufacturer #: W11527890
This dishrack is for dishwashers. Dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
$192.30
In Stock
Questions And Answers for KDTE104KPS0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tami
September 14, 2022
My dishwasher did not come with a drainage hose. When the plumber arrived he told me to order it and he would return. Do you have the EXACT part for this model?
FYI: On the machine itself it’s stamped:
BTL321134192903366
For model number KDTE104KPS0
Hi Tami,
Thank you for your question. The part number listed under your model number for the drain hose is PS12745420. The part number listed for the 12-foot drain hose is PS12745137. If you need help placing an order for one of these hoses, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Carol
August 4, 2023
The dishwasher door falls open; I think it needs a new spring or some kind of attachment to the spring is broken. Please help!
For model number KDTE104KPS0
Hello Carol, thank you for your inquiry. The issue seems to be with the door hinges. We would recommend checking them. If there is any damage, you may need to replace them. The right door hinge is part number PS16660570, and the left door hinge is part number PS16660571. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Wayne
September 30, 2023
Need a new flat fiber key found on the door that inserts into a slot on the cabinet at the top. Looks like it’s a sensor or safety catch to lock the door closed
For model number KDTE104KPS0
Hello Wayne, thank you for reaching out. The part you are looking for is the door latch, part number PS12745375. If you need help placing an order, customer service is open 7 days a week!
Was this helpful?
Thank you for voting!
Related Parts:
Wayne
October 1, 2023
During installation I damaged the door sensor , a fibrous projecting finger that inserts into the machine upon closing. I can’t find it in repair parts. (Because it never wears out apparently. ( I thought it was a shipping brace). Thank you. The machine works great but I only get two washings before it goes dead and I need to reprogram it
For model number KDTE104KPS0
Hi Wayne, thank you for contacting us. The part you are looking for is the door latch, part number PS12745375. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the KDTE104KPS0
[Viewing 5 of 5]Leaking
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Parts Used:
-
Judith from Essex, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
75 of 106 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking Dishwasher
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking
... Read more
through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.
Read less
Parts Used:
-
Scott from ISLE, MN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve leaking at water connection
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read more
achine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
Read less
Parts Used:
-
Joseph from BIRMINGHAM, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!