EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KDI KitchenAid Dishwasher - Overview

Models starting with KDI

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Catch Kit – Part Number: 279570
$8.55
In Stock
Door Catch Kit
★★★★★
★★★★★
(136)
Part #279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.
Drip Bowl - 6 Inch – Part Number: W10196406RW
$15.00
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(40)
Part #W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it now has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Dishwasher Single Roller Wheel – Part Number: WP4162322
$7.47
In Stock
Drip Bowl Kit - Light Gray – Part Number: W10291024
$50.56
In Stock
Drip Bowl Kit - Light Gray
★★★★★
★★★★★
(15)
Part #W10291024
This is a kit of 4 drip bowls. This includes 2 large pans and 2 small pans. All pans have holes in the bottom and they are light gray in color. The large bowl is for an 8-inch element and is 10 inches in diameter. The small pans are meant for 6 inch elements and measure 8 inches in diameter. These durable drip bowls are made of a porcelain finish and are safe for the dishwasher. These drip bowls are for electric ranges that have two-wire plug-in elements. Drip bowls catch food and grease that drip off cookware placed on the element.
Dishwasher Faucet Adapter – Part Number: WPW10254672
$47.40
In Stock
Dishwasher Faucet Adapter
★★★★★
★★★★★
(26)
Part #WPW10254672
The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure that it fits the coupler on your dishwasher or washer. As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This adapter is approximately 1 inch in length, and slightly less than one inch in diameter. This adapter comes with two different thicknesses of rubber washer. You will not need to use both so be sure to determine which thickness works best for your tap before installing it.
Dishwasher Single Lower Roller Axle – Part Number: WP4162321
No Longer Available
Dishwasher Single Lower Roller Axle
★★★★★
★★★★★
(11)
Part #WP4162321
This is the axle ONLY. Wheel is sold separately.
Rubber Water Delivery Tube – Part Number: WP4171544
No Longer Available
Rubber Water Delivery Tube
★★★★★
★★★★★
(20)
Part #WP4171544
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.
Door Hinge Guide Bearing Sleeve – Part Number: WP4160355
No Longer Available
Door Hinge Guide Bearing Sleeve
Part #WP4160355
Sold individually.
Dishwasher Gasket – Part Number: WP8531743
$42.12
In Stock
Dishwasher Gasket
★★★★★
★★★★★
(2)
Part #WP8531743
Also known as a washer.
Dishwasher Water Inlet Valve – Part Number: WP4171000
$103.38
Special Order
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(3)
Part #WP4171000
This valve replaces old two coil valves. The attaching solenoid on the valve open and close according to the desired amount of water needed.
Dishwasher Door Spring – Part Number: WP4162629
$24.67
In Stock
Door Switch Actuator Kit – Part Number: 4172040
No Longer Available
Door Switch Actuator Kit
Part #4172040
This dishwasher door switch will shut your dishwasher off when the door is opened.

Common Symptoms of models starting with KDI

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Catch part had fallen out,/ was missing
676 of 740 people found this instruction helpful.
  • Terri from Saint Augustine, FL
  • Really Easy
  • Less than 15 mins
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
Was this helpful?
Thank you for voting!
Door wouldn't latch.
204 of 285 people found this instruction helpful.
  • Melody from North Las Vegas, NV
  • Really Easy
  • Less than 15 mins
I can't believe I waited so long to find this part and do this. I got the package very fast, opened it, took the piece to my dryer and popped it into place with my fingers. It worked perfectly! this took all of two minutes and saved me from having to hold the dryer door closed with a stick. Thank you, thank you!!!
Was this helpful?
Thank you for voting!
dryer door would not stay shut
103 of 107 people found this instruction helpful.
  • Pam from Woodbridge, VA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
This repair was a cinch. Pliers to pull out the metal piece and a screwdriver to pry out the 'catch' part in the door. Both replacement pieces went right in. I cannot believe how easy and CHEAP this fix was, and I'm so glad I found this site!! I figured I would have to call a repairman and pay big bucks, so I put it off, but the door was getting worse--slamming it so hard to keep it shut. Again, thanks for this great site.
Was this helpful?
Thank you for voting!