KDFM404KPS1 Admiral Dishwasher - Overview

Diagrams for KDFM404KPS1

See every part. Know exactly what you need.

Diagram

Parts for the KDFM404KPS1

$15.00

Dishwasher Mounting Bracket

★★★★★

(14)

Part #WP8269145

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read more

Read less

$48.45

Tine Row

★★★★★

(41)

Part #W10728160

The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row con...Read more

Read less

$119.95

Lower Dishrack

★★★★★

(32)

Part #W10728159

This lower dishrack is a genuine replacement component designed for select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Manufactured for durability and optimal performance, it securely holds plates, bowls, and other dishware during wash cycles. The rack is finished in gray, though the shade may vary ...Read more

Read less

$7.47

Washer Hose Clamp

★★★★★

(1)

Part #WP596669

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read more

Read less

$7.47

Dishwasher Screw

★★★★★

(6)

Part #WPW10348409

Sold individually.

$9.62

Hose Clamp

★★★★★

(2)

Part #WP285655

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read more

Read less

$7.47

Dishwasher Screw 818 X 5/8

★★★★★

(1)

Part #WP9741232

Sold individually.

$19.30

Elbow Hose Fitting

★★★★★

(4)

Part #W10685193

This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.

$55.29

Water Inlet Valve

★★★★★

(2)

Part #W11434044

The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more

Read less

$22.52

STOP

★★★★★

(1)

Part #W11545307

$17.15

MANIFOLD

Part #W11573754

This dishwasher manifold, also known as the top dishrack tube hanger, is a genuine OEM replacement part designed to direct water to the spray arms and support smooth upper rack movement. It attaches to the bottom of the upper dishrack, allowing water to flow from the pump for thorough cleaning. Made from durable plastic, this component of...Read more

Read less

$19.30

MANIFOLD

Part #W11568642

Questions And Answers for KDFM404KPS1

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Don - For model number KDFM404KPS1

October 19, 2025

Door spring must be broken Door will fall open if not held on to went opening SS FC2601091 Type 567-0

Hello Don, thank you for reaching out. To resolve the issue, we would recommend replacing the door hinge assemblies, as the spring rods come attached to the door hinges. The part number for the right side hinge assembly is PS18355221, and the part number for the left side hinge assembly is PS18355222. We hope this solves your problem!

$44.23

HINGE ASSY-RIGHT

$44.23

HINGE ASSY-LEFT

Was this helpful?

Common Symptoms of the KDFM404KPS1

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Not cleaning dishes properly

Show All

Will not fill with water

Will not dispense detergent

Not drying dishes properly

Videos related to models starting with KDFM404KPS1

Watch our pros, then fix it yourself.

Replacing the Dishwasher Mounting Bracket

Replacing the Lower Dishrack

Replacing the Tine Row

Replacing the Washer Hose Clamp

Replacing the Hose Clamp

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Lost dishwasher brackets

78 of 118 people found this instruction helpful.

Judith from Essex, MA
Easy
15 - 30 mins
Screw drivers

I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!

Was this helpful?

Broken cheap plastic wheels lower rack

33 of 41 people found this instruction helpful.

Peter from WESTMONT, IL
Very Easy
Less than 15 mins
Screw drivers

Popped out old wheel housing. Popped in replacement with a little help from a flathead screwdriver. Easy.

Was this helpful?

Inlet valve leaking at water connection

17 of 25 people found this instruction helpful.

Joseph from BIRMINGHAM, MI
Really Easy
30 - 60 mins
Nutdriver

The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m ... Read more

Read less

Was this helpful?