Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KCMS132SBL6

KCMS132SBL6 KitchenAid Microwave - Overview

Get Parts and Repair Help for KCMS132SBL6

If you know the microwave repair part you need, you can browse the list of all parts on the KCMS132SBL6, or you can search by name or part description. You can also find your part by where it is located on the KCMS132SBL6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.


Silicone Adhesive

This adhesive is made specifically to attach dishwasher tine tips (the pointy parts of the dish rack) and door gaskets (when necessary). This adhesive is white silicone and is also known as adhesive caulk. One tube is approximately 3 oz. of product. This adhesive provides a heat-resistant seal between workings. Before applying the adhesive, ensure the surface is clean, dry, and does not have any grease or oil on it. For safety, wear gloves when working with this adhesive to ensure it does not come into contact with your skin.


Door Button - Brown


Light Bulb

Sold individually.




Door Handle with Screws




Sold individually.


Stir Blade Drive Belt

This part connects the stir blade to the fan motor.

Fuse - 20Amp

This part helps protect your appliance from short circuits and power surges.

Common Symptoms of the KCMS132SBL6

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave plastic door frame broken

  • Customer: Frederic from Los Altos, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 13 people found this instruction helpful
Ordered a new door frame morning of March 25.
Part arrived the next morning and by that afternoon, the
replacement was complete. Only four screws held the frame. read more

Broken Belt on Wave Disperser

  • Customer: Harold from Foxfield, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
The microwave is the upper unit of combination microwave & conventional oven. Disconnect power to the unit. Slide unit out of built-in cabinet to expose the top shield of the microwave. Remove 5 screws holding top cover in place. Remove cover, which exposes the belt reel and drive motor. Install the new belt by threading it on the drive motor pulley, th... read more

old button broke into three pieces

  • Customer: Robert from Bradenton, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
removed seven screws to take door apart and replace button. Glad that you still had the part for a 25-year-old unit. read more