Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBLS36FTX02

KBLS36FTX02 KitchenAid Refrigerator - Overview

Get Parts and Repair Help for KBLS36FTX02

If you know the refrigerator repair part you need, you can browse the list of all parts on the KBLS36FTX02, or you can search by name or part description. You can also find your part by where it is located on the KBLS36FTX02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for KBLS36FTX02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for KBLS36FTX02

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$73.72

Single Water Filter

The single water filter is a part for your refrigerator. This filter has been updated by the manufacturer and although it may appear different, it will still function the same. The...

$20.56

Cap, Water Filter (Black)

This black cap covers the water filter.

$11.11

Light Rocker Switch

This light rocker light switch is used in a number of household appliances. It is most often found in refrigerators and freezers. This is a simple mechanism that helps turn the lig...

$6.85

Light Bulb - 120V 25W

This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.

$29.04

Fan Blade

Used with Evaporator Fan Motors.

$2.96

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$100.14

Icemaker Motor Kit

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

$30.64

Thermostat Order 542369 Cement

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispensing ice, there could be an issue with the thermostat. Before you begin this repair, make sure the power is disconnected from your refrigerator, and that any food that may spoil is safely stored. This is an OEM part and is sourced directly from the manufacturer. This thermostat is sold individually, and comes with two attachment clips.

$17.57

Water Fill Cup and Bearing

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ic...

$5.40

Screw

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

there were directions

  • Customer: Kate from Jacksonville, FL
  • Difficulty: Very Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 712 of 1189 people found this instruction helpful
We didn't know where the product went and it was very difficult to install. read more

six months the light turns red. time to replace filter

  • Customer: Leroy from Perkiomenville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 266 of 334 people found this instruction helpful
First I shut the water off to the refrigerator.then i pushed the big button in the middle of the grille below the refrigerator door. pulled out the old filter, took the front cap off the old filter put it on the new filter. took the two red caps off the new filter. pushed the filter in till it locked in place. all done! Turned the back on. read more

Water filter replacement

  • Customer: Victoria from Beaverton, OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 122 of 160 people found this instruction helpful
It's simple enough in theory: read the side of the box and follow the instructions. BUT you need to really push the knob in pretty hard (I am a girl, and my hand strength isn't that good). If you don't, when you turn the knob, the filter won't come out, then it's tougher. So: make sure the knob pops before you turn! read more