KBL34A (HA034F-AS01) Kawasaki Trimmer - Overview

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.

The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the part simply attaches on top of the fuel tank. Refer to your make, model, and diagram to ensure this is the correct part.

The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carburetor or to start the engine. If damaged, it will no longer pump fuel. It may also be physically, noticably broken. Replace this part if dam...Read moreaged. Check your make, model and diagrams to ensure you're choosing the right part.

This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the tank. The other end attaches to the carburetor. If damaged, the carburetor will not get enough fuel, and the part must be replaced. Installi...Read moreng this part is rated as "Easy" and can be done with pliers and a screwdriver. Refer to your make, model and diagrams to ensure you're choosing the right part.

The return fuel line is used to transfer fuel from the carburetor, back to the fuel tank. This fuel tube is designed for use with trimmers and is made of high-quality polymer and measures approximately 3.5-inches (90cm) in length, .12-inches in inner-diameter (3mm) and .24-inches in outer-diameter (6mm). This tube does not come with any s...Read moreecuring hardware and is sold as an individual part. Although this tube is known for its strength to most chemicals like gasoline, prolonged exposure to UV rays, extreme cold or hot temperatures and certain fuel additives can cause this tube to degrade quicker. If you notice a reduction in flexibility and clarity of the material, and general brittleness to the tube, replace it immediately. Prolonged use of a fuel line that needs replacing can cause issues such as fuel leaks and engine performance issues resulting from poor fuel flow or contaminated fuel. To replace this tube for your trimmer, drain the fuel from your trimmer before simply removing it from the carburetor and grommet, and any securing hardware. You may require a push tool to install the new tube, and that should be done with the appropriate hardware to secure it to the carburetor and fuel tank grommet.

This fuel filter helps to ensure the fuel that goes into the engine is free of any contaminants. It is a genuine OEM sourced replacement part that is specially made for Kawasaki lawn and garden equipment. Filters over time may get clogged restricting the fuel flow, if this happens the filter would need to be replaced. This item consists of a metal frame with a felt filter material and it is sold individually.

A cutter reel, also known as a line or trimmer head, is a component that is necessary within the cutting head of a trimmer, since it supplies the trimmer with line/spool. This part is made of plastic and is an OEM part that measures approximately 4.2-inches in diameter and has 2 lanes for spool storage. Since this part is made of plastic,...Read more it can break or crack from a drop impact, or simply over time and exposure to gasoline, oil and heat. If you find that the spool is not coming out properly, or too much spool is being used at once, this part may need replacing. Replacing this part is as simple as opening the trimmer head and accessing where the spool is housed, removing the previous reel, and replacing it with the new one. This part is sold as an individual part without any securing hardware and is compatible with various makes and models of trimmer.

This is an authentic manufacturer-approved replacement part specially designed for use Kawasaki two stroke engines. Its purpose is to filter out dust and debris from contaminating the carburetor, over time the filter will get clogged restricting the air flow eventually requiring a replacement to maintain peak performance. This filter is made of high-quality foam material and it is sold individually.

The bolt attaches to the air filter cap. It is a genuine item that is supplied by the original equipment manufacturer for use with Kawasaki trimmers. This part is made of metal and plastic and is available individually. During replacement, no tools should be required to install this part correctly. It will require replacing if it becomes broken or stripped.

This is an authentic item that is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is one of the special diaphragms that ensure an air-tight seal in the carburetor, please make sure to refer the appropriate diagrams of your model for the correct location and ...Read moreapplication of this hardware. Unfortunately, over time gaskets and diaphragms tend to wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.

This is an OEM sourced part that has been manufactured for use with Kawasaki outdoor power equipment with two stroke engines. The gasket is part of the carburetor assembly and is used to seal the connection between the diaphragm and the body of the carburetor. This gasket is available as an individual replacement part.