K97 - Overview

Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a kit or assembly, and is sold individually. This part will wear through regular use and should be replaced if you notice signs of damage or...Read more wear. When it malfunctions, you will see fuel leaking from the bushing. You will need a screwdriver and pliers to complete this repair. Customers rate this repair as Easy.

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

This fuel tank bushing grommet creates a tight seal where the fuel line enters the tank, helping prevent leaks and keep air and debris out of the fuel system. Made from durable, fuel-resistant rubber, it supports reliable engine performance and consistent fuel flow. Replacing a worn or damaged grommet can help eliminate leaks and restore proper operation.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap y...Read moreour spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to install this component.

This replacement fuel filter is supplied directly from original equipment manufacturer. It is specially produced for use with Husqvarna chainsaws/power cutters. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is clean. It will over time get clogged and restrict the fuel from getting to the engine. If ...Read morethe engine performs sluggishly or easily chokes out replacing fuel filter may resolve the issue.

This is an authentic OEM sourced replacement part designed for use with Husqvarna power cutters. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a torx screwdriver.

The spark plug is a key component in outdoor power equipment, providing the ignition needed to start and run engines smoothly. Commonly used in chainsaws, brush cutters, and other compatible tools, this high-quality part delivers a reliable spark for efficient combustion and dependable performance. Its durable design ensures consistent ig...Read morenition even under demanding conditions, helping your equipment start easily and operate at peak efficiency. Replacing a worn or faulty spark plug is an important part of regular maintenance, as it helps prevent hard starts, misfires, and reduced engine power. With a precise fit and proven performance, this spark plug is an essential part for keeping your equipment running reliably season after season.

This replacement screw is a genuine Husqvarna part, not an aftermarket substitution. It is supplied directly from original equipment manufacturer for use with power cutters. This screw is has multiple applications depending on your tool. Make sure to check appropriate diagram for correct location and use of this hardware. You will need a hex socket head to tighten or loosen the screw. Includes one screw per order.

This is a genuine Husqvarna and Jonsered replacement part that has been sourced from the original manufacturer to be used with chainsaws, brushcutters, stump grinders, pruning saws, and power cutters. The sealing ring is used to provide spacing and to prevent oil leaks between the drive shaft and the cover panel. This item is sold as an individual replacement part.

This is an authentic OEM sourced item that is designed for Husqvarna power cutters. It is one of the special antivibration elements that are attached to the fuel tank assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality comp...Read moreonent is made of durable metal with a plastic piece and is sold individually. Please note the hardware to secure it and the other antivibration element are both sold separately.

This item is a genuine Husqvarna replacement part that has been OEM sourced to ensure quality. The plastic coupler is intended to be used with power cutter saws. The coupler is part of the water supply system that is used when cutting masonry. This item allows a hose to connect to the saw to keep the blade lubricated. The coupler can be purchased as a single item.