K950RING (2007-01) Husqvarna Circular Saw - Overview

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. It is used to secure starter housing to the unit. This is a metal phillips head screw which is sold individually.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

This screw is an authentic OEM part which made for Husqvarna chainsaws. It is designed for multiple uses based on your tool. Please refer to diagrams for correct location and applied use of this screw. It includes one (1) metal screw per order. This is a hex head item so you would need a hex key/allen wrench to install or remove it.

This replacement fuel filter is supplied directly from original equipment manufacturer. It is specially produced for use with Husqvarna chainsaws/power cutters. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is clean. It will over time get clogged and restrict the fuel from getting to the engine. If ...Read morethe engine performs sluggishly or easily chokes out replacing fuel filter may resolve the issue.

This item is a genuine Husqvarna replacement part that has been OEM sourced to ensure quality. The plastic coupler is intended to be used with power cutter saws. The coupler is part of the water supply system that is used when cutting masonry. This item allows a hose to connect to the saw to keep the blade lubricated. The coupler can be purchased as a single item.

This is an original Husqvarna replacement part manufactured for use with chainsaws. Some ignition models do not include the spark plug connector also called a spark plug boot, it is recommended to inspect the spark plug boot or replace it when servicing the ignition module. The rubber spark plug connection kit includes the coil spring. Th...Read moree coil spring has a sharp end that pierces the insulation of the ignition module\'s wire, and it is the coil spring that makes contact to the wire. This spark plug connection kit is sold individually.

This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately.

This item is sourced directly from the original equipment manufacturer for use with Husqvarna power cutters. The pulley is an important part of the mechanism that allows a user to pull-start the unit. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic with a metal bracket and is...Read more sold individually. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a screwdriver to take apart the housing and replace this starter pulley.

This is an authentic replacement part manufactured for use with Husqvarna chainsaws and power cutters. The spring is commonly used to provide tension to the pawl on the flywheel and the spring allows the pawl to pivot. This spring is available individually, please note two springs are required.

This is a genuine OEM sourced part which is specially made for use with Husqvarna power cutters. It is designed to keep the fuel in the tank, unfortunately, over time it may get damaged or lost eventually requiring a replacement. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground....Read more Keep in mind it is made of high-quality plastic and is sold individually. Please make sure to refer to the appropriate diagram of your model for the correct location and application of this component.

This is a genuine manufacturer sourced replacement part designed for use with Husqvarna lawn and garden equipment. It provides an air-tight seal for the muffler, over time the material may become brittle and crack eventually requiring a replacement. This part is made of high-quality composite material and it is sold individually.