My Orders
K60 - Overview
Models starting with K60
Click on the best match to narrow your results.
- K600 (3205) Braun Food Processor (() Multiquick 3)
- K6000GH (K 6000 GH 1.194-109.0) Karcher Pressure Washer (Pressure Washer)
- K600FPWH Braun Food Processor (K600 Combimax Type 3205 V...)
- K600FPWH (0X63205713) Braun Food Processor (K600 Combimax Type 3205 Ver: Ca, Mx, Us 0x63205713)
- K60FH0 Graco Paint Sprayer
- K60FH1 Graco Miscellaneous (King 60:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, Xtr-7+, 50 Ft (15 M) Hose, 6 Ft (1.8 M) Whip)
- K60FH1 (A, B) Graco Miscellaneous (King 60:1 Sprayer, Integrated Filter, Heavy Duty Cart, Air Controls, Siphon Kit, Xtr-7+, 50 Ft (15 M) Hose, 6 Ft (1.8 M) Whip)
- K60FILLA Magic Chef Range (Magic Chef Range/Stove/Oven K60filla)
- K60FILLB Maytag Range
- K60FILLW Magic Chef Range (Magic Chef Range/Stove/Oven K60fillw)
- K60FL1 Graco Paint Sprayer
- K60FW0 Graco Miscellaneous (King 60:1 Sprayer, Integrated Filter, Wall Mount, Air Controls, Siphon Kit)
- K60FW1 Graco Paint Sprayer
- K60NH0 Graco Miscellaneous (King 60:1 Sprayer, Non-Filter, Heavy Duty Cart, Air Controls, Siphon Kit)
- K60NH1 Graco Paint Sprayer
- K60PB Maytag Range
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$21.45
In Stock
Screw
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
No Longer Available
Spill Valve
Part #4.591-040.0
This spill valve is for pressure washers.
Spill valve opens when water flowing through the pump gets too hot, releasing the hot water in exchange for cooler water.
$6.76
In Stock
Oil Sealing 12x20x4/6
Part #6.365-393.0
This OEM Grooved Ring is a 12 x 20 x 4/6 rubber ring which can be installed with a screwdriver and wrench set. Installation is rated as "Medium" difficulty. It attaches in the cylinder head and is used to keep the oil in the pump from mixing with the water. If broken it will leak and must be replaced.
$11.43
In Stock
Suction Valve Complete
Part #4.580-330.0
Genuine Karcher replacement part, it is sold individually. This part along with the piston controls the flow of water through the pump assembly. This part has a tendency to wear out. It may be wise to keep a few extra on hand.
$7.63
In Stock
Grooved Ring
Part #6.365-394.0
Genuine Karcher replacement part, this item is sold individually. This part acts as a seal to keep the oil in the reservoir and the water in the pump form contaminating each other. It is installed on the piston.
$6.40
In Stock
Pressure Spring
Part #5.332-391.0
This is a high-quality pressure spring that is made for use with Karcher pressure washers. It is an authentic item that is supplied from the original manufacturer. The spring applies tension on the piston that helps to create pressure inside the cylinder. Over time it may wear out, get damaged or lost eventually requiring a replacement to...Read more maintain your pump. Refer to the owners manual and the diagrams of your model for the correct installation. Note, this pressure spring is made of durable metal and is sold as an individual item. To perform this repair you will need a screwdriver and a wrench set. Remove the cover and the cylinder head to gain access to the pressure spring.
Read less
$6.40
In Stock
Washer
Part #5.115-721.0
This is a Genuine OEM Authorized replacement part used on Karcher Pressure Washers. This part is made out of Rubber Material and it is Sold Individually. This Washer fits on top of Grooved Ring and provides a seal. You would need a Set of Wrenches and Screwdriver to get take off the Cover and take apart the Pump.
No Longer Available
Qh Wheel Assy, 10-inch Gray St
Part #8.754-186.0
This high quality wheel and tire assembly is a genuine manufacturer sourced replacement part that is specially produced for Karcher pressure washers. It is the wheel that supports and helps to move your unit around. This part consists of a durable metal wheel with a rubber tire and it is sold individually, please note the hardware to secure it is sold separately.
$6.40
In Stock
O-ring Seal 80,0 X 3,0 -nbr 7
Part #6.362-471.0
It is an OEM item which is made for Karcher pressure washers. This component provides an air-tight seal for the pump housing. Over time the material will wear out and it may begin to crack eventually requiring a replacement to prevent leaks. To ensure the correct installation of the new gasket, refer to the appropriate diagrams of your sp...Read moreecific model. Note, it is made of a durable material and is sold as an individual component. You will need a socket set to take the pump housing apart in order to perform this repair.
Read less
$15.66
In Stock
Drain Plug Only For Replacemen
Part #4.132-007.0
This is a drain plug for different models of pressure washers. It is used to seal the check valve for the engine of the pressure washer and features an O-ring that can deteriorate over time. Failing to replace the drain plug can result in water leakage from the pump, potentially causing damage to the pump and surrounding parts, and leadin...Read moreg to pump overheating and seizing. To replace this drain plug, you will only need a few tools such as a screwdriver, Allen key, a set of pliers, and a utility knife. First, remove the pump from the pressure washer assembly using a screwdriver or Allen key. Then, disconnect the detergent hose by cutting it with a utility knife. Gain access to the valve(s), which may require you to use a screwdriver and/or hammer to remove the covering plate. Use a set of pliers to rotate and loosen the drain plug and remove it. Apply silicone grease to the new drain plug before installing and securing it. Reinstall the metal plate covering, reconnect the detergent hose to the pump, and reinstall the pump. Monitor your pressure washer for any leaks or other issues with the new drain plug installed.
Read less
$6.62
On Order
Radial Shaft Seal Ring A26x37x
Part #7.367-018.0
It is a genuine OEM approved seal which is supplied for use with Karcher pressure washers. This replacement part is used to create and air-tight seal for the rotary shaft, over time the material may begin to deteriorate and crack eventually requiring replacement to maintain peak performance. It is made of durable rubber and it is sold individually.
$6.53
On Order
Washer
Part #5.115-720.0
This is a genuine replacement part sourced from the original manufacturer for use with pressure washers made by Karcher. The washer goes between the sleeve and the grooved ring. A screwdriver and a wrench set may be needed during the replacement of this part. It is made of metal and will need to be replaced if it breaks. This is available as an individual replacement part.
Common Symptoms of models starting with K60
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More