K532-5 Kohler Engine - Overview

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This item is available as an individual replacement part. The retainer attaches to the intake valve and the exhaust valve. A set of pliers might be needed during the installation process. It is made of metal and will need to be replaced if it becomes broken. This is an authentic OEM sourced item which is specially produced for use with Kohler engines and generators.

This is a genuine OEM sourced replacement part which is supplied for use with Kohler engines commonly installed on lawn and garden equipment. It is used to provide an air-tight seal for the cover, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time gaskets t...Read moreend to wear out and crack eventually requiring replacement to maintain a proper seal. It is a high-quality component which is made of durable composite material and is sold individually.

This woodruff key, also known as a half-moon key due to its shape, is compatible with several different makes and models of small engine lawn equipment and is sold as an individual part. This key measures 1/2-inch in length and 1/8-inch in diameter and is made of high-quality metal. If you find excessive or strange noises, vibration, or l...Read moreoss of performance when starting your equipment, the key may be damaged and responsible. This key aligns the flywheel, camshaft and cam gear, all of which are used to maintain momentum and drive the engine, and this woodruff key plays an important role in that. You will need a wrench and/or screwdriver to replace the key, but you must first disconnect the spark plug. Gain access to the key by removing the flywheel nut and flywheel, then remove the key and clean the keyway, before installing the new key and the rest of the assembly.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

Breaker (Points) When Installing 47 150 03-S breaker on engines below Serial #13007371, always use new push rod 41 411 01-S

This is an authentic OEM sourced part that is intended to be used with lawnmower engines from MTD and Kohler. The filter kit attaches to the intake housing assembly. This item is used to prevent dust and debris from entering the engine's intake. The kit includes the foam pre-filter and the main air filter. This kit is priced as a single item.

It is an authentic manufacturer sourced replacement part designed for use with Kohler engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

This is an authentic replacement part manufactured for use with Kohler small engines. The bowl gasket is used to seal the connection between the carburetor body and the float bowl. It is recommended to replace gaskets when servicing or rebuilding the carburetor to ensure good seals when the parts are reassembled. This bowl gasket is available as an individual replacement part.