K280MS-PL-WB (K 280MS-PL-WB 1.415-251.0) Karcher Pressure Washer - Overview

This OEM Grooved Ring is a 12 x 20 x 4/6 rubber ring which can be installed with a screwdriver and wrench set. Installation is rated as "Medium" difficulty. It attaches in the cylinder head and is used to keep the oil in the pump from mixing with the water. If broken it will leak and must be replaced.

This is a genuine item that is specially designed for use with Karcher pressure washers. It is supplied by the original equipment manufacturer. The oil helps to lubricate internal components of the pump to ensure it runs properly. Check the oil level regularly. Oil level should always be between the "FULL" and "ADD" level marks on the dip...Read morestick. Be sure the machine is level when checking the oil level. This will prevent them from wearing out. Refer to the owners manual of your model for the correct application of this oil. This synthetic 15W40 oil is sold in a single 1-liter container.

This is a genuine OEM supplied part which is specially designed for use with Karcher pressure washers. The filter helps to remove dust and other contaminants from the water that goes through the pump. Over time it may wear out, get damaged or lost eventually requiring a replacement. To ensure the correct application, refer to the owners m...Read moreanual for your model. Keep in mind this high-quality filter is sold as an individual item.

This replacement soap diffuser hose is specially manufactured for use with Karcher pressure washers. It is the hose that the in-tank filter is attached to to deliver the soap needed for the unit. It is made from durable flexible rubber material and it is sold individually.

This manufacturer sourced replacement part designed for use with Karcher pressure washers. It is the essential part of the unit allowing to direct and control the spray. Please note the wand is sold separately. This pistol assembly is made out of plastic and it is sold individually.

This is an original Karcher replacement part. The gasket is designed by the manufacturer for use in pressure washers. This part is made of flexible rubber, and is generally used to seal the connection between components. It may be found in various locations in the machine. Please refer to the parts diagram to be sure of ordering the correct part. This product is sold individually.

These are authentic items that are supplied by the original equipment manufacturer for use with Karcher pressure washers. Generally, O-rings are utilized to provide a tight seal between connected components. Unfortunately, over time the material will wear out and it may begin to fail eventually requiring a replacement. Keep in mind this h...Read moreigh-quality kit includes three durable rubber O-rings. Check the diagrams for your model to ensure the correct repair procedure.

This is a genuine Karcher replacement part sourced directly from the manufacturer. The pressure spring is commonly found in Karcher pressure washers. This is a metal part used in the pistol nozzle to maintain tension between the parts, allowing adjustment of the pressure. No tools are required to replace this item. Simply remove the old part and slip the new one into its place. This item is sold individually.

It is a genuine replacement component that is supplied directly from the original equipment manufacturer for use with Karcher pressure washers. The part helps to provide a tight seal between connected pieces, over time it may wear out and begin to crack eventually requiring a replacement. Please refer to the appropriate diagrams of your m...Read moreodel for the correct location and application of this hardware. It is a high-quality item which is made of durable rubber and is sold individually.

The clamp is made out of plastic and attaches to the pistol. This is an OEM replacement part for pressure washers made by Karcher. This item is sold as an individual replacement. A set of pliers may be required to replace this part if it becomes broken.

An authentic OEM sourced replacement part that is specially designed for use with Karcher pressure washers. This is the special o-ring which helps to ensure the proper air-tight seal between the pressure hose and the pistol adapter. It is a high-quality component which is made of durable rubber material and it is sold individually. Over t...Read moreime o-rings tend to deteriorate and may crack eventually requiring replacement to maintain the proper seal.