K12 - Overview

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

This genuine Karcher replacement part is sourced directly from the original manufacturer and is designed for use with compatible pressure washers. The plastic cap attaches securely to the pump housing and serves as a cover for the oil fill spout, helping to protect the internal components from dirt and debris. Durable and easy to install,...Read more this cap is available as an individual replacement part and is ideal for maintaining the performance and longevity of your pressure washer.

It is an OEM item which is made for Karcher pressure washers. This component provides an air-tight seal for the pump housing. Over time the material will wear out and it may begin to crack eventually requiring a replacement to prevent leaks. To ensure the correct installation of the new gasket, refer to the appropriate diagrams of your sp...Read moreecific model. Note, it is made of a durable material and is sold as an individual component. You will need a socket set to take the pump housing apart in order to perform this repair.

The plastic grooved ring fits next to the washer which fits next to the other grooved ring, part number 6.365-341.0, which is sold separately. This is an original Karcher part used in pressure washers. The ring is sold as an individual replacement part. A screwdriver might be needed during installation of this part.

This is an authentic OEM part made by Karcher for use in pressure washers. The connection fits next to the filter and the cover on one side and the hose coupling on the other. It is made of plastic and will need replacing if it breaks. A screwdriver might be needed during the installation process. This part is available as an individual replacement.

This is a genuine Karcher part sourced directly from the manufacturer for use in pressure washers. The seal goes between the washer and the bush. It seals the connection so that water does not leak out. This part is made of hard rubber and is sold individually.

O-rings are flexible circles which are used to prevent leaks and maintain pressure. This part is an authentic OEM replacement ring used in Karcher pressure washers. These O-rings are used at the connection point between the machine and its hose. This set includes five (5) identical O-rings. Please note that the wand itself uses a separat...Read moree set of O-rings, part # 2.640-729.0 O-Ring Seal Set. Multiple other sizes of O-ring are used in various other spots on these machines; see manual for part numbers and placements.

It is a genuine OEM approved seal which is supplied for use with Karcher pressure washers. This replacement part is used to create and air-tight seal for the rotary shaft, over time the material may begin to deteriorate and crack eventually requiring replacement to maintain peak performance. It is made of durable rubber and it is sold individually.

This authentic manufacturer-supplied part is specially designed for use with Karcher pressure washers. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a damaged part that was installed on a new unit. One durable metal grooved ring is included. A wr...Read moreench set will be needed to perform this repair. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the proper repair procedure.

This is a genuine item that is specially designed for use with Karcher pressure washers. It is supplied by the original equipment manufacturer. The oil helps to lubricate internal components of the pump to ensure it runs properly. Check the oil level regularly. Oil level should always be between the "FULL" and "ADD" level marks on the dip...Read morestick. Be sure the machine is level when checking the oil level. This will prevent them from wearing out. Refer to the owners manual of your model for the correct application of this oil. This synthetic 15W40 oil is sold in a single 1-liter container.

This M8 flange nut secures the guide bar and chain assembly in place, ensuring proper alignment and safe operation of your equipment. Designed with an integrated flange and anti-slip teeth to resist loosening from vibration, it provides a reliable, secure hold during heavy use. Made from durable, corrosion-resistant steel with an M8 threa...Read mored and 1.25?mm pitch, replacing a worn or missing nut helps maintain stability and dependable performance.

This is a genuine OEM sourced replacement part designed for use with Karcher pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 3600 PSI. Easily connects to the washers with M22 connection.