EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JTP30SM2SS General Electric Wall Oven - Overview

Diagrams for JTP30SM2SS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Sensor – Part Number: WB23T10015
$40.51
In Stock
Oven Sensor
★★★★★
★★★★★
(20)
Part #WB23T10015
The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need to replace the oven sensor. The oven sensor is typically located in the back of the oven so you will most likely need to pull your oven out to access it. Many of our customers have rated this repair as easy. You will need a Phillips screwdriver to complete this repair. Be sure to disconnect the power source and shut off the gas valve before doing this repair.
Overlay - Black – Part Number: WB27T11229
$38.32
In Stock
Overlay - Black
★★★★★
★★★★★
(29)
Part #WB27T11229
NOTE: This overlay is for retrofitted models only.
Oven Bulb Lens Cover - Glass – Part Number: WB25T10002
$16.07
In Stock
Oven Bulb Lens Cover - Glass
★★★★★
★★★★★
(10)
Part #WB25T10002
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main reason to replace the oven bulb lens cover is if it is cracked, damaged, or missing. Be sure that the lens cover is cool to the touch before you begin this repair. To remove the lens cover simply turn it counterclockwise until you can remove it. Replace it with a new cover and turn it clockwise to lock it into place. This is an OEM part sourced from the manufacturer, and it is sold individually.
Oven Light Housing – Part Number: WB08T10002
$39.95
In Stock
Oven Light Housing
★★★★★
★★★★★
(12)
Part #WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, with an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.
Screw – Part Number: WH2X930
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WH2X930
This screw is sold individually.
Window Pack Assembly – Part Number: WB56T10105
$149.06
In Stock
Window Pack Assembly
★★★★★
★★★★★
(15)
Part #WB56T10105
The GE Oven Door Window Pack Assembly is a genuine OEM part that fits select GE ranges and ovens. It includes a heat-resistant inner glass panel, frame, and seals, providing insulation and clear visibility into the oven cavity. Common issues like cracked glass or heat loss can indicate the need for a replacement. Ensure the oven is cool to the touch and wear gloves for safe installation.
Door Gasket – Part Number: WB04T10050
$63.63
In Stock
Door Gasket
★★★★★
★★★★★
(16)
Part #WB04T10050
This oven door gasket is a high-performance seal made from heat-resistant rubber and fiberglass, designed to create an airtight barrier between the oven door and cavity. Measuring approximately 89.76 inches in length, its flexible construction allows for a precise fit across a range of oven models. The gasket plays a critical role in maintaining consistent internal temperatures by preventing heat from escaping, which supports even cooking and improved energy efficiency. Installation is beginner-friendly and typically takes under 30 minutes using pliers. Some versions include up to 25 mounting clips for secure attachment. Signs of wear—such as visible cracks, tears, or heat leakage—indicate the need for replacement to restore optimal oven performance.
Range Screw – Part Number: WB01T10008
$16.05
In Stock
Range Screw
★★★★★
★★★★★
(2)
Part #WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
Rack – Part Number: WB48T10050
$82.64
On Order
Rack
★★★★★
★★★★★
(1)
Part #WB48T10050
This oven rack is a genuine OEM replacement designed to provide a stable, level surface for cookware during baking, roasting, and broiling. Built for durability, it offers strong support for bakeware and prevents bending or warping over time. The rack fits securely into oven side supports and slides smoothly for easy loading and unloading. By promoting even heat circulation, it ensures consistent cooking results. Replace your rack if it is bent, rusty, or missing to maintain optimal oven performance.
Range Upper Limit Switch Lock – Part Number: WB24T10060
$25.87
In Stock
TAPE FOAM – Part Number: WB01T10052
$15.00
Special Order
TAPE FOAM
Part #WB01T10052
Range GE Badge – Part Number: WB02T10359
$12.85
On Order
Range GE Badge
Part #WB02T10359

Questions And Answers for JTP30SM2SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat - For model number JTP30SM2SS
December 2, 2019
Need the overlay only for the above oven. Existing is 17.5" long. Can you folks help me?
Chris Boyle Profile
Hello Pat and thanks for writing. Overlay Part Number: PS2370149 is in the list of compatible items for your model, however, it is only 12 inches long. We hope this helps. Please contact us anytime. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. Hope this helps GE US 800-626-2005
$38.32
In Stock
Overlay - Black
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the JTP30SM2SS

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven was not coming up to temperature
57 of 79 people found this instruction helpful.
  • Sean from Highlands Ranch, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wal l. Overall, a very easy repair once you get the oven out.
Was this helpful?
Thank you for voting!
Oven Lamp Holder Burned
25 of 33 people found this instruction helpful.
  • Jack from Okmulgee, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Was this helpful?
Thank you for voting!
Actual temperature did not match set temp
22 of 31 people found this instruction helpful.
  • Brian from Fairfield, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed the oven door for easy acces to oven. Unscrewed (philips screwdriver) the screw holding temp sensor in place. Gently pulled the wiring until quick connector was located. Pushed down on locking level on quick connect while holding other end of wiring (so wiring would not fall back behind oven). Connected the new sensor and scre wed back in place. Reinstalled oven door. Tested temperature settings by turning on oven and comparing with a separate oven thermometer.
Was this helpful?
Thank you for voting!