The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature ...
$38.48
In Stock
Order within the next 10 hrs and your part ships today!
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$12.20
In Stock
Order within the next 10 hrs and your part ships today!
Order within the next 10 hrs and your part ships today!
Questions And Answers for JKP55SM1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Floyd Fitzgerald
January 21, 2020
When baking in top oven sometimes it goes into self cleaning mode on its on and cannot cancel it, have to turn breaker off. What can cause this to happen
For model number JKP55SM1SS
Hello Floyd, thank you for your question. The self clean is regulated by the touch pad and the main board. We would recommend testing the parts to determine what the issue is. The most likely issue is the main board. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maureen
December 13, 2022
I would like to replace the racks in this oven. The serial # HR603664Q. I'm not the original owner. Can you help find me these parts.
Thank you.
Maureen
For model number JKP55SM1SS
Hi Maureen, thank you for reaching out. The racks in your model come with part number PS1765902. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Touchpad for this oven need help in finding this part
For model number JKP55SM1SS
Hello William, thank you for getting in touch. The overlay you are looking for is part number PS2370153. If you need help placing an order, customer service is open 7 days a week!
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
1) pull out the stove 2) remove the 7 sheet metal screws holding the back panel on. (the panel that also covers where the cord splits and connects to the oven. 3) Find the small plastic connector located in the middle of the back of the range and unplug it. 4) open the front of the oven and remove the one screw holding in
... Read morethe oven temp sensor. 5) replace the sensor and make sure to "feed" the new cord through as best you can. 6) I had to dig through the insulation a little bit to find the new wiring harness 7) connect the wiring harness and put the back of the range back on
note: this was very simple to do if you think this might be the problem don't hesitate to handle this one yourself.