The flat style oven igniter kit comes with a mounting bracket and a wire connector with a plug. The igniter kit is used to light the oven burner. If you notice that your oven will not heat up properly, the igniter kit may need to be replaced. This flat style gas oven igniter has a body length of 3-3/4 inches. When completing this repair, ...Read morethe connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. Before you begin this repair, be sure to disconnect the power source from the oven, and shut off the gas supply.
This 40-Watt light bulb is sold individually.
It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding...Read more, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Restore the look and functionality of your range with this silver-colored burner knob. Crafted from sturdy plastic, it includes a D-shaped interior clip to ensure a snug fit on the control shaft. Whether your original knob is worn or broken, this replacement installs easily without tools—just remove the damaged knob and push the new one into position.
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and r...Read moreeplace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
This is a non-stick griddle designed for use with most major appliance brand stovetops. This griddle measures approximately 20 inches long and 9 inches wide and sits on top of your stovetop to cook food. If your current griddle is damaged, no longer provides a non-stick surface, or is simply dirty and no longer useable, it needs to be rep...Read morelaced. To replace it, simply lift the old griddle off your stove grate and place the new one in its place. This OEM griddle is sold on its own and does not include any other accessories.
This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and airflow around food for consistent cooking results. Constructed from solid 304 stainless steel, the rack resists rust and warping even at hi...Read moregh temperatures, ensuring long-term reliability. Measuring approximately 23.75 inches in length and 16.25 inches in width, it offers ample space for cookware. Many versions feature convenient handles at each end, allowing for easy placement and removal from the oven.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat - For model number JGBS66REK3SS
August 16, 2021
One igniter burner ignite with every burner
Hi Pat,
Thank you for your question. When you turn a burner knob to the lite position, all of the burners will start sparking/clicking. This is normal. Once the burner you have turned on ignites, the other burners will stop. We hope this helps! If you have any questions, please let us know.
I need the conversion kit from Propane ovef to Natural Gas kit
Hello Daniel, thank you for your inquiry. In order to go back to natural gas, you may need to remove the LP conversion kit. You may need to purchase the burner tubes, PS11736368-central, PS11736369-right front, PS11736377-left front, PS11729119-right rear, and PS11729118-left rear. We hope this information helps!
Can you get a grill for this model. It came with the griddle and it would be nice to have a grill as well.
Hello Jack, thank you for getting in touch. The part you are looking for is part number PS12341979. If you require assistance to place an order, please contact customer service!
Oven is not getting hot the glow plug is working but I’m wondering if the valve is bad. How can I tell
Hi Ben, thank you for getting in touch. The oven gas safety control valve, part number PS16225917, should measure less than 5 ohms of resistance. If the safety gas valve measures no continuity, you will need to replace it. We are sure this will help!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The igniter glowed, but never got hot enough to ignite the propane, so I did smell propane.
678 of 734 peoplefound this instruction helpful.
Sidney from Marysville, CA
Really Easy
30 - 60 mins
Nutdriver
First, I removed the two screws that held the heat shield in place. Second, I removed the one screw that held a small wire covering. That covering kept the wires inside the back wall of the range. Third, I removed the two screws that held the Igniter Kit, and unplugged it from the back of the range. I then carefully put the new ignite
... Read morer in, and reassembled everything in reverse order. It only took about 30 minutes to do the repair, and 30 minutes of cleaning and wiping of the broiler area. (It is amazing what you see when you take things apart). I should have been wiping things up over the past few months. Overall, a very easy repair. I ordered the part at 12:30 in the afternoon, and FedEx delivered it the next morning at 11:30, all for the regular shipping price of $6.95. VERY HAPPY.....
Read less
Was this helpful?
Thank you for voting!
oven would not light or keep temp.
450 of 468 peoplefound this instruction helpful.
zack from corning, CA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers, Socket set, Wrench set
first I thought it was a faulty gas valve, so I pulled it out, started researching for a replacement part, found your site and started research. I discovered thhat the igniter was the culprit, that info. saved me about a week of time and a 100 bucks, so I installed the gas safety valve back in the oven, patience is the word for the day,
... Read moreyou cross thread this and you are done! any way ordered ignighter and it shipped to my house in about 4 days, New York to Calif. had it installed in about 15 minutes fired off the oven and ...IT worked hurray...10-9-2010,
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't heat. This degraded over several weeks.
310 of 411 peoplefound this instruction helpful.
Durwood from Suffield, CT
Easy
15 - 30 mins
Nutdriver, Screw drivers
1. Pulled the 110V power plug. It was not necessary to turn off the gas; just be careful not to stretch or pinch the flexhose behind the stove. 2. Removed the oven door by opening a couple of inches then lifting upward. 3. Removed the warming drawer by pulling out to the stop, then pushing the small levers on the side of the t
... Read morerack to release. 4. Removed two flathead screws at the back of the oven to free up the oven bottom panel. 5. Removed the bottom panel by lifting up the pack until the front edge clears the overhang. 6. Removed the two screws on the side that hold the igniter to the burner tube. Be sure not to let the screws drop into the gaps in the oven floor. Note the position of the bent tab with the holes to ease aligning the new part. 7. Reached through the warming drawer to release the plug by squeezing the tabs on the end. 8. Pulled the plug up through the gap in the oven floor (where the wires went through) and connected it to the other connector. 9. Ran the new wire down through the oven floor. 10. Aligned the new igniter and tightened them. Had trouble getting the screws started so I used a toothpick to align one hole while starting the other screw. 11. Replaced the oven bottom panel. It needed a little jockeying to get the screws and holes aligned. 12. Replaced the door. 13. Replaced the oven drawer.
This turned out to be a good time to clean all those dusty places that don't get cleaned that often.
My Orders
