JBZFL24IGX10 Jenn-Air Freezer - Overview

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

This screw is sold individually

Also known as Alumilastic Cement.

This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valve, tape, and (1) tubing connector.

Proper alignment often depends on a strong housing that holds and shields the working parts inside. Damage from heat, impact, or normal wear can cause looseness, noise, poor movement, or added stress on nearby components. Check the mounting hardware and inner supports before ordering a replacement. Match the housing to the full model numb...Read moreer and parts diagram. Shut down and disconnect the equipment before installation, transfer attached components carefully, and make sure nothing rubs, binds, or shifts after the housing is secured.

The Whirlpool Refrigerator Grease is a genuine part manufactured by Whirlpool, designed for use in refrigerators. This part is compatible with various Whirlpool refrigerator models, ensuring smooth operation of your appliance. The grease, sometimes referred to as lubricant, plays a vital role in the overall functioning of the refrigerator...Read more. The purpose of this grease is to reduce friction between moving parts within your refrigerator. This helps to minimize wear and tear on these components, thereby extending their lifespan. The exact location and function of this grease may vary depending on the specific model of your refrigerator. If your refrigerator is making unusual noises or not operating as smoothly as it should, it could be an indicator that the grease needs to be replaced. While it's not always easy to determine if the grease is the issue, these symptoms may suggest it's time for a replacement.

Sold individually.

A dark display, changing temperatures, or unusual cooling cycles can point to a damaged electronic control board. The board sends power and instructions to key refrigerator systems. First check the outlet, circuit breaker, wire plugs, fans, and temperature sensors. A tripped breaker may also signal a short that needs professional repair. ...Read moreMatch the replacement to the full model number and software code. Disconnect power before opening the control cover, handle the board only by its edges, and copy the original wire positions. Complete any model setup steps before testing the refrigerator.

This compressor mounting kit is a set of components used to secure and support the compressor in refrigerators. The kit is supplied by the original manufacturer, and it includes 4 rubber grommets/bushings and 4 mounting screws. The rubber bushings function as buffers between the compressor and mounting brackets to reduce movement and nois...Read moree from the appliance, and the mounting screws hold the compressor in place to provide additional stability. Over time it is normal for these components to wear down or become damaged or loose, leading to increased vibrations, excessive noise, and potential damage to the compressor and surrounding parts. Disconnect the power supply and remove the rear appliance cover to access the compressor unit. Remove the mounting screws and lift the compressor out of the refrigerator. Carefully remove the rubber bushings off the unit and press the new ones into place. Place the compressor back in the refrigerator and secure it with the new mounting screws. Reattach the rear cover to complete your repair.